# Show us your vertical clamping methods!

**URL:** <https://forum.onefinitycnc.com/t/show-us-your-vertical-clamping-methods/9035>\
**Category:** Machine Setups\
**Created:** [November 20, 2021, 1:56pm UTC](https://forum.onefinitycnc.com/t/show-us-your-vertical-clamping-methods/9035 "2021-11-20T13:56:20Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![HardtailSr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/hardtailsr/32/35326_2.png) [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)\
**Post date:** [August 11, 2022, 9:03pm UTC](https://forum.onefinitycnc.com/t/show-us-your-vertical-clamping-methods/9035/12 "2022-08-11T21:03:53Z")

</div>

![IMG_20220811_163429074](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/5/5e3d445cca56c8024009868cffa8fdccfeb0287f.jpeg)

and here it is with it’s trap door in place now all I need to do is get the JM in and set up everything else . spoil board. keyways drag chains…etc.etc.etc.

---

_[View the full topic](https://forum.onefinitycnc.com/t/show-us-your-vertical-clamping-methods/9035)._