# Show us your vertical clamping methods!

**URL:** <https://forum.onefinitycnc.com/t/show-us-your-vertical-clamping-methods/9035>\
**Category:** Machine Setups\
**Created:** [November 20, 2021, 1:56pm UTC](https://forum.onefinitycnc.com/t/show-us-your-vertical-clamping-methods/9035 "2021-11-20T13:56:20Z")\
**Posts on this page:** 1\
**Showing post:** 60

<div class="post-metadata">

**Author:** ![bhorling](https://avatars.discourse-cdn.com/v4/letter/b/d78d45/32.png) [@bhorling](https://forum.onefinitycnc.com/u/bhorling)\
**Post date:** [July 3, 2025, 12:15am UTC](https://forum.onefinitycnc.com/t/show-us-your-vertical-clamping-methods/9035/60 "2025-07-03T00:15:11Z")

</div>

Here’s my version - replacing one of the panels in my spoilboard and cutting a slot through the table top. The suspended vertical table has slots for clamping and dog holes for alignment.

 ![PXL_20250703_000422390](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/3/5/35cc635d37be1e464b8b00157426378a462b15f4.jpeg)  
 ![PXL_20250703_000358098](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/4/b/4b3a7953e834496b376430b4f804bbd338b5e067.jpeg)  
 ![Screenshot 2025-07-02 at 8.13.13 PM](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/3/9/3994a59cb9991159e2be4d73ddc40955599b5f38.jpeg)

---

_[View the full topic](https://forum.onefinitycnc.com/t/show-us-your-vertical-clamping-methods/9035)._