# Simple warmup g code program for manual oiler

**URL:** <https://forum.onefinitycnc.com/t/simple-warmup-g-code-program-for-manual-oiler/22393>\
**Category:** Uncategorized\
**Created:** [September 14, 2023, 5:00pm UTC](https://forum.onefinitycnc.com/t/simple-warmup-g-code-program-for-manual-oiler/22393 "2023-09-14T17:00:37Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![TMToronto](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TMToronto](https://forum.onefinitycnc.com/u/TMToronto)\
**Post date:** [September 14, 2023, 5:00pm UTC](https://forum.onefinitycnc.com/t/simple-warmup-g-code-program-for-manual-oiler/22393/1 "2023-09-14T17:00:37Z")

</div>

I made some changes recently to my WoodWorker X50 build, so wanted to modify the warmup routine I use to distribute oil throughout the linear motion components.

It is empowering to get back to manually creating a g code file, albeit a very simple one, while refreshing my memory on the various g codes and their uses/functions. I learned to add messages (MSG), and use them to pause the program at various points to allow the addition of more oil (I am using a manual pump oiler I had installed quite a while ago for the ball screw nuts). I am also adding oil to the felt wipers I designed and am currently testing on the Y rails.

The video is short, and provides the g code at the end. Here is the YT link…

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/2/6/26b21e811d4136d92ea87b957715985fb858c823.jpeg "CNC NEW warmup routine") ](https://www.youtube.com/watch?v=T9MNBNa1yeo)