# Size for Machinist table

**URL:** <https://forum.onefinitycnc.com/t/size-for-machinist-table/888>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [September 17, 2020, 1:48pm UTC](https://forum.onefinitycnc.com/t/size-for-machinist-table/888 "2020-09-17T13:48:25Z")\
**Posts on this page:** 1\
**Showing post:** 38

<div class="post-metadata">

**Author:** ![Machinist](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/machinist/32/36465_2.png) [@Machinist](https://forum.onefinitycnc.com/u/Machinist)\
**Post date:** [December 21, 2020, 3:20pm UTC](https://forum.onefinitycnc.com/t/size-for-machinist-table/888/38 "2020-12-21T15:20:59Z")

</div>

Thanks Larry, today’s project (well, probably today & tomorrow) will be to add some alum. extrusion rails between the bearing block & Z axis assembly to get the additional depth required by not having a wasteboard. Will supply pics if you’re interested. This won’t be an issue using your vise, but anything down close to the table surface (where I typically work) will require the extra reach down. This will be the cheap & easy way forward to get up & running, but I may revisit this in the future for a better solution. I don’t know… I’ll see how this works out first. May be no need for anything more elaborate.

---

_[View the full topic](https://forum.onefinitycnc.com/t/size-for-machinist-table/888)._