# Size for Machinist table

**URL:** <https://forum.onefinitycnc.com/t/size-for-machinist-table/888>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [September 17, 2020, 1:48pm UTC](https://forum.onefinitycnc.com/t/size-for-machinist-table/888 "2020-09-17T13:48:25Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![Machinist](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/machinist/32/36465_2.png) [@Machinist](https://forum.onefinitycnc.com/u/Machinist)\
**Post date:** [September 24, 2020, 11:46pm UTC](https://forum.onefinitycnc.com/t/size-for-machinist-table/888/7 "2020-09-24T23:46:47Z")

</div>

Got the base done today. This design is a redesigned version of the one I used with my x-carve.  
The steel top is 7 ga. (.179") with 1/4-20 tapped holes on a 2" grid. The frame is 20 x 40 aluminum extrusion, and the whole thing is sitting on 16 rubber isolators.

 ![IMG_0858](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/8/85c89487930209c91b79b605c258bd20d3ba7530.jpeg)

 ![IMG_0859](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/a/ae3f2cf8caa6f50bcdb770c0e90c8acebf3e97d7.jpeg)

 ![IMG_0860](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/c/7/c74cdff6891d8bb848a87dd090ecf298ddaef553.jpeg)

 ![IMG_0857](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/a/2/a28bec92caf9cb97c34799d19772c13c45fa4e58.jpeg)

 ![IMG_0862](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/7/2/72ade5007eefc75822a4bb7cc97cdfe26ecd902d.jpeg)

 ![IMG_0861](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/4/f/4f3577016331e0f0995c93d87adf2e02e27c4ac4.jpeg)

---

_[View the full topic](https://forum.onefinitycnc.com/t/size-for-machinist-table/888)._