# Size of table for Foreman

**URL:** <https://forum.onefinitycnc.com/t/size-of-table-for-foreman/19823>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [April 3, 2023, 12:28pm UTC](https://forum.onefinitycnc.com/t/size-of-table-for-foreman/19823 "2023-04-03T12:28:44Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [April 4, 2023, 8:44am UTC](https://forum.onefinitycnc.com/t/size-of-table-for-foreman/19823/3 "2023-04-04T08:44:59Z")

</div>

Hey Owen,

> [@OwenH](#):
>
> Can someone please advise me as to the ideal table size needed?

I wrote 🢡 [this](https://forum.onefinitycnc.com/t/elite-table-builds/18240/43) the other day. Foreman wasn’t there but the width of the X rail is the same as Elite Journeyman, and you can adjust for depth and height according to the [manual](https://www.onefinitycnc.com/support). The machine’s foot is higher on Foreman as on Journeyman and Elite, as it has [50 mm rails instead of 35 mm rails](https://forum.onefinitycnc.com/t/differences-between-x-50-rails-upgrade-and-x-35-rails-standard/6033) on the Y axes.

Will you be using the QCW frame? For Foreman, it has [its own manual](https://www.onefinitycnc.com/_files/ugd/f704eb_87231311e49c49a5839c99589768da1e.pdf).

 ![Onefinity_Elite_Foreman_QCW_Frame_dimensions](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/0/f/0f3c6487f07eccbbae13fc2a685002654924df36.png)

---

_[View the full topic](https://forum.onefinitycnc.com/t/size-of-table-for-foreman/19823)._