# Specs on Journeyman Pro

**URL:** <https://forum.onefinitycnc.com/t/specs-on-journeyman-pro/24613>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [January 10, 2024, 2:02am UTC](https://forum.onefinitycnc.com/t/specs-on-journeyman-pro/24613 "2024-01-10T02:02:00Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [March 13, 2024, 3:48pm UTC](https://forum.onefinitycnc.com/t/specs-on-journeyman-pro/24613/3 "2024-03-13T15:48:15Z")

</div>

Hey Kenny @stone329, hey Scott @tahoe1840,

this question was already answered. We have a search function in this forum. Note that with the introduction of the [PRO variant](https://forum.onefinitycnc.com/t/onefinity-is-excited-to-announce-the-pro-series/23736) of Journeyman, weight slightly increased because of stronger stepper motor and the drag chain, and the heavier [Z-20 assembly](https://www.onefinitycnc.com/product-page/z-20-heavy-duty-z-slider)

- [Journeyman weight](https://forum.onefinitycnc.com/search?q=journeyman%20weight)
  - [Total packages weight for Journeyman and Woodworker](https://forum.onefinitycnc.com/t/total-packages-weight-for-journeyman-and-woodworker/10934/2)

The long package is the Journeyman X axis.

Welcome to the forum!

---

_[View the full topic](https://forum.onefinitycnc.com/t/specs-on-journeyman-pro/24613)._