# Spindle connection on Masso

**URL:** <https://forum.onefinitycnc.com/t/spindle-connection-on-masso/19772>\
**Category:** Elite Series (Masso & Redline) (Gen 1)\
**Created:** [March 31, 2023, 6:22pm UTC](https://forum.onefinitycnc.com/t/spindle-connection-on-masso/19772 "2023-03-31T18:22:54Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![PezWoodworks](https://avatars.discourse-cdn.com/v4/letter/p/ea5d25/32.png) [@PezWoodworks](https://forum.onefinitycnc.com/u/PezWoodworks)\
**Post date:** [March 31, 2023, 6:22pm UTC](https://forum.onefinitycnc.com/t/spindle-connection-on-masso/19772/1 "2023-03-31T18:22:55Z")

</div>

Where can a person find the cable connector to plug into the spindle control in the bottom of the control box, there is reference to a GX12 in the manual but I ordered them and they re too large.  
Thanks, Pat

---

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [March 31, 2023, 7:22pm UTC](https://forum.onefinitycnc.com/t/spindle-connection-on-masso/19772/2 "2023-03-31T19:22:27Z")

</div>

Hey Pat,

←

&nbsp;

* * *

 ![Onefinity_Elite_Masso_6-pin_spindle_cable](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/2/6/26f71d5cb5eb806998255833c4d66a0146d78187.png)  
[Onefinity Elite Series Installation and Operation Instructions (PDF)](https://www.onefinitycnc.com/_files/ugd/f704eb_4e98c0f27f4d43e991af6b10cefd4b20.pdf), page 38

#### Further reading

- [Masso Documentation: Spindle VFD examples](https://docs.masso.com.au/wiring-and-setup/setup-and-calibration/spindle-vfd-examples)

---

<div class="post-metadata">

**Author:** ![Pleased2fly](https://avatars.discourse-cdn.com/v4/letter/p/439d5e/32.png) [@Pleased2fly](https://forum.onefinitycnc.com/u/Pleased2fly)\
**Post date:** [March 31, 2023, 8:06pm UTC](https://forum.onefinitycnc.com/t/spindle-connection-on-masso/19772/3 "2023-03-31T20:06:35Z")

</div>

[Hxchen 6 Pin Metal Male Female Panel Connector 12mm GX12-6P Silver Aviation Plug - (2 Sets)](https://amzn.to/3zHukqF)

Size:GX12-6P

This one on Amazon was a perfect fit. $7.99 for 2

---

<div class="post-metadata">

**Author:** ![PezWoodworks](https://avatars.discourse-cdn.com/v4/letter/p/ea5d25/32.png) [@PezWoodworks](https://forum.onefinitycnc.com/u/PezWoodworks)\
**Post date:** [April 1, 2023, 1:39pm UTC](https://forum.onefinitycnc.com/t/spindle-connection-on-masso/19772/4 "2023-04-01T13:39:49Z")

</div>

Thank you both for this  
Pat

---

<div class="post-metadata">

**Author:** ![gszrir](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/gszrir/32/21538_2.png) [@gszrir](https://forum.onefinitycnc.com/u/gszrir)\
**Post date:** [April 4, 2023, 3:57am UTC](https://forum.onefinitycnc.com/t/spindle-connection-on-masso/19772/5 "2023-04-04T03:57:23Z")

</div>

I ended bypassing this connector and wiring directly to the G3. I followed the instructions on this video, [https://youtu.be/uW6sSfKCyW0](https://youtu.be/uW6sSfKCyW0)

 ![Capture](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/b/3/b331be42f9af2af1eca3999563f15953449c5ef9.jpeg)

Cables with tape were from the existing port, the blue cable to the left is for the router and vac outlets which I don’t need.