# Spindle Mounting with ATC

**URL:** <https://forum.onefinitycnc.com/t/spindle-mounting-with-atc/30710>\
**Category:** Elite Series (Masso & Redline) (Gen 1)\
**Created:** [February 2, 2025, 4:33pm UTC](https://forum.onefinitycnc.com/t/spindle-mounting-with-atc/30710 "2025-02-02T16:33:39Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![rducroz](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/rducroz/32/30815_2.png) [@rducroz](https://forum.onefinitycnc.com/u/rducroz)\
**Post date:** [February 2, 2025, 4:33pm UTC](https://forum.onefinitycnc.com/t/spindle-mounting-with-atc/30710/1 "2025-02-02T16:33:39Z")

</div>

I’m curious if mounting the spindle with the 70mm gap for ATC coming gives me any clearance at all. Z all the way up on a 2” walnut

 ![IMG_6603](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/a/5/a572a7a855bb66bc6b2c412f327d69fb76710ea7.jpeg)

---

<div class="post-metadata">

**Author:** ![Borgorl](https://avatars.discourse-cdn.com/v4/letter/b/87869e/32.png) [@Borgorl](https://forum.onefinitycnc.com/u/Borgorl)\
**Post date:** [February 2, 2025, 6:23pm UTC](https://forum.onefinitycnc.com/t/spindle-mounting-with-atc/30710/2 "2025-02-02T18:23:29Z")

</div>

Curious now too. I don’t have mine yet but is the Z slider mounted in the highest position?

---

<div class="post-metadata">

**Author:** ![3D-CNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/3d-cnc/32/33076_2.png) [@3D-CNC](https://forum.onefinitycnc.com/u/3D-CNC)\
**Post date:** [February 3, 2025, 1:34pm UTC](https://forum.onefinitycnc.com/t/spindle-mounting-with-atc/30710/3 "2025-02-03T13:34:03Z")

</div>

It looks like you can go up one more bolt hole on the Z slider

---

<div class="post-metadata">

**Author:** ![tdwilli1](https://avatars.discourse-cdn.com/v4/letter/t/e99b99/32.png) [@tdwilli1](https://forum.onefinitycnc.com/u/tdwilli1)\
**Post date:** [February 3, 2025, 1:45pm UTC](https://forum.onefinitycnc.com/t/spindle-mounting-with-atc/30710/4 "2025-02-03T13:45:03Z")

</div>

Or move the spindle up?

---

<div class="post-metadata">

**Author:** ![jdfarr1973](https://avatars.discourse-cdn.com/v4/letter/j/50afbb/32.png) [@jdfarr1973](https://forum.onefinitycnc.com/u/jdfarr1973)\
**Post date:** [February 3, 2025, 2:48pm UTC](https://forum.onefinitycnc.com/t/spindle-mounting-with-atc/30710/5 "2025-02-03T14:48:41Z")

</div>

yup, if you need more clearance than that you could always go with spacers under the feet of machine.