# Spindle Upgrade - Z-Axis Stepper Mount issue

**URL:** <https://forum.onefinitycnc.com/t/spindle-upgrade-z-axis-stepper-mount-issue/9134>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [November 25, 2021, 2:48pm UTC](https://forum.onefinitycnc.com/t/spindle-upgrade-z-axis-stepper-mount-issue/9134 "2021-11-25T14:48:54Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [November 25, 2021, 3:03pm UTC](https://forum.onefinitycnc.com/t/spindle-upgrade-z-axis-stepper-mount-issue/9134/4 "2021-11-25T15:03:46Z")

</div>

Hey Carmen,

> [@CWBox](#):
>
> Would be nice to see a redesign of the 65mm mount so that the spindle would clear the stepper though.

You might as well wait for Christmas and Easter to be the same day. Onefinity stated clearly that they [don’t support anything other than the trim router](https://forum.onefinitycnc.com/t/supported-routers-spindles/36).

I think the community was very happy that they [responded to the demand](https://forum.onefinitycnc.com/t/80mm-spindle-mount-announcement/5861/3) for a 80 mm spindle mount.

---

_[View the full topic](https://forum.onefinitycnc.com/t/spindle-upgrade-z-axis-stepper-mount-issue/9134)._