# Status: Jogging - Will not do anything

**URL:** <https://forum.onefinitycnc.com/t/status-jogging-will-not-do-anything/12507>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [April 16, 2022, 6:39pm UTC](https://forum.onefinitycnc.com/t/status-jogging-will-not-do-anything/12507 "2022-04-16T18:39:42Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Photoshopmagician](https://avatars.discourse-cdn.com/v4/letter/p/90db22/32.png) [@Photoshopmagician](https://forum.onefinitycnc.com/u/Photoshopmagician)\
**Post date:** [April 16, 2022, 6:39pm UTC](https://forum.onefinitycnc.com/t/status-jogging-will-not-do-anything/12507/1 "2022-04-16T18:39:42Z")

</div>

Hello,

The status of my machine is jogging. It won’t home or do anything. The buttons are all greyed out and the only thing I can do is use the controller with the machine.

I’ve tried restarting, shutting down and turning back on, emergency stop and nothing seems to work.

Any help would be appreciated.

---

<div class="post-metadata">

**Author:** ![WaywardWoodworker](https://avatars.discourse-cdn.com/v4/letter/w/e79b87/32.png) [@WaywardWoodworker](https://forum.onefinitycnc.com/u/WaywardWoodworker)\
**Post date:** [April 16, 2022, 8:32pm UTC](https://forum.onefinitycnc.com/t/status-jogging-will-not-do-anything/12507/2 "2022-04-16T20:32:31Z")

</div>

Do you have a gamepad plugged in? If so can you unplug it and see if the issue persists? I had a similar issue because one of the buttons was stuck.

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [April 16, 2022, 8:45pm UTC](https://forum.onefinitycnc.com/t/status-jogging-will-not-do-anything/12507/3 "2022-04-16T20:45:25Z")

</div>

Like we emailed, try flashing the OS.