# Suck It Dust Boot Gen 1 - Differences between regular and Pro model (FAQ) **URL:** \ **Category:** FAQ\ **Created:** [December 11, 2020, 5:56pm UTC](https://forum.onefinitycnc.com/t/suck-it-dust-boot-gen-1-differences-between-regular-and-pro-model-faq/2056 "2020-12-11T17:56:35Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [December 11, 2020, 5:56pm UTC](https://forum.onefinitycnc.com/t/suck-it-dust-boot-gen-1-differences-between-regular-and-pro-model-faq/2056/1 "2020-12-11T17:56:35Z")
What’s the difference between the regular and pro version of the Suck It Dust Boot? ![f704eb_c3758bc98a43472ebb4ba8b2466d0bd2_mv2](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/9/f/9f13ef8dab271c0f9291c96e8152b6fea80b66e6.jpeg) There is no difference in the fundamentals of the suck it dust boot versions. The only differences are what is included in the package. The differences are in _italics below:_ **Regular Version:** - Directed sucktion shoe with built in 2 1/2: vacuum hose adapter - Injection molded arms - 1" OAH brush - 1 Router Hole Plate - 1 set of height adjusting locks and all necessary hardware **Pro Version** - Directed sucktion shoe with built in 2 1/2: vacuum hose adapter - Injection molded arms - 1" OAH brush _AND 1.5" OAH brush_ - _3 Router Hole Plate. (two 1" hole and one 2" hole)_ - 1 set of height adjusting locks and all necessary hardware - _Magnetically hinged rear clip._ We’ve uploaded the svgs of the router hole plates to cut your own replacements : [SVGS HERE](https://forum.onefinitycnc.com/t/suck-it-router-sheilds-svgs/1414) The Suck It Dust Boot sold via Onefinity will ONLY work with the Onefinity CNC. We no longer offer parts or support for other machines.