# Suck-it T-Nut for Mounting Arms?

**URL:** <https://forum.onefinitycnc.com/t/suck-it-t-nut-for-mounting-arms/21175>\
**Category:** Suck It Dust Boot\
**Created:** [June 23, 2023, 3:14pm UTC](https://forum.onefinitycnc.com/t/suck-it-t-nut-for-mounting-arms/21175 "2023-06-23T15:14:42Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![makerjace](https://avatars.discourse-cdn.com/v4/letter/m/e47c2d/32.png) [@makerjace](https://forum.onefinitycnc.com/u/makerjace)\
**Post date:** [June 23, 2023, 3:14pm UTC](https://forum.onefinitycnc.com/t/suck-it-t-nut-for-mounting-arms/21175/1 "2023-06-23T15:14:42Z")

</div>

Does anyone know where to find these bad boys?? It’s the little t-nut that slides in the tracks on the sides of the Z slider to adjust the suck-it height. Checked the @OnefinityCNC website but came up empty handed.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/8/b/8bd936d14ed0a662ccc6f8f5a33cd255c540858e.jpeg)

Thanks in advance!

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [June 23, 2023, 3:17pm UTC](https://forum.onefinitycnc.com/t/suck-it-t-nut-for-mounting-arms/21175/2 "2023-06-23T15:17:54Z")

</div>

Email [info@onefinitycnc.com](mailto:info@onefinitycnc.com) and they can invoice you for them.