# Table for OneFinity Woodworker

**URL:** <https://forum.onefinitycnc.com/t/table-for-onefinity-woodworker/10895>\
**Category:** Uncategorized\
**Created:** [February 3, 2022, 4:28pm UTC](https://forum.onefinitycnc.com/t/table-for-onefinity-woodworker/10895 "2022-02-03T16:28:11Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![JimHatch](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/jimhatch/32/3928_2.png) [@JimHatch](https://forum.onefinitycnc.com/u/JimHatch)\
**Post date:** [February 4, 2022, 8:36pm UTC](https://forum.onefinitycnc.com/t/table-for-onefinity-woodworker/10895/8 "2022-02-04T20:36:15Z")

</div>

> [@crz383](#):
>
> Your cabinet design sounds pretty good. What are its dimensions? Can you post a picture of it?

My cabinet is part of my tilt table. I used Drew Fisher’s design with mods to handle a JM. He’s on YouTube.

I have a post with a bunch of photos but this is what looks like.

 ![PXL_20211204_233720273.NIGHT](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/c/6/c6f4fc4562319929083822cb1f696f33baeebba0.jpeg)

This is the cabinet end.

 ![PXL_20211204_232727900](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/e/7/e7441e445be5f7abafc43ac568dd882ece7381af.jpeg)

Tilted

 ![PXL_20211214_233155749](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/7/a/7a72819eb2a53ec2a89c732e692e59db7078e3f8.jpeg)

---

_[View the full topic](https://forum.onefinitycnc.com/t/table-for-onefinity-woodworker/10895)._