# Table upgrade suggestions

**URL:** <https://forum.onefinitycnc.com/t/table-upgrade-suggestions/5731>\
**Category:** Wasteboard\
**Created:** [May 25, 2021, 6:26am UTC](https://forum.onefinitycnc.com/t/table-upgrade-suggestions/5731 "2021-05-25T06:26:24Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Coastal3D](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/coastal3d/32/1972_2.png) [@Coastal3D](https://forum.onefinitycnc.com/u/Coastal3D)\
**Post date:** [May 25, 2021, 6:26am UTC](https://forum.onefinitycnc.com/t/table-upgrade-suggestions/5731/1 "2021-05-25T06:26:24Z")

</div>

Hi all, going to spend the day upgrading my table to some T-tracks but wanted to ask if you t-track users on here have any advice for my setup?  
I’ve seen the videos on combining t-track, threaded insert and dog holes etc… would you say this is the way to go or is it overkill?

Also looking for ideas for clamps I can cut myself to suit the t-track system. Once again, I’ve seen the options out there, just wanting to hear some first hand experience feedback on what works well for you!

---

<div class="post-metadata">

**Author:** ![Ken](https://avatars.discourse-cdn.com/v4/letter/k/cc9497/32.png) [@Ken](https://forum.onefinitycnc.com/u/Ken)\
**Post date:** [May 25, 2021, 1:13pm UTC](https://forum.onefinitycnc.com/t/table-upgrade-suggestions/5731/2 "2021-05-25T13:13:40Z")

</div>

Good morning Kyle. I have a T-track and waste board setup with no threaded insert or dog holes. Overall, I like the simplicity of the T-track and use Rockler mini clamps as the secondary hold.

My primary hold is blue tape and CA glue, which I have used with great success. For larger pieces or if there is a bow in the wood, I use a combination of CA glue and the T-track.

I hope my experience helps.

---

<div class="post-metadata">

**Author:** ![RonHoppus](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/ronhoppus/32/2374_2.png) [@RonHoppus](https://forum.onefinitycnc.com/u/RonHoppus)\
**Post date:** [May 25, 2021, 2:06pm UTC](https://forum.onefinitycnc.com/t/table-upgrade-suggestions/5731/3 "2021-05-25T14:06:31Z")

</div>

I found this to be helpful when getting started. He has other good info as well.

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/3/c/3c5085310c9351e1e31a1938b4f2f5ea5974a126.jpeg "Onefinity- laying out your spoilboard") ](https://www.youtube.com/watch?v=vLXSlF1kFkI)

---

<div class="post-metadata">

**Author:** ![RonHoppus](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/ronhoppus/32/2374_2.png) [@RonHoppus](https://forum.onefinitycnc.com/u/RonHoppus)\
**Post date:** [May 25, 2021, 2:08pm UTC](https://forum.onefinitycnc.com/t/table-upgrade-suggestions/5731/4 "2021-05-25T14:08:40Z")

</div>

Check this for some simple effective clamps.

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/7/773ca78f77de5fe323874897522c35847e23eee8.jpeg "How To Make Clamps For Your CNC Router, Easy CNC Router Projects, [Vcarve & Apsire] - Garrett Fromme") ](https://www.youtube.com/watch?v=b9miRXZGd1I)