# The perfect combination

**URL:** <https://forum.onefinitycnc.com/t/the-perfect-combination/21618>\
**Category:** Uncategorized\
**Created:** [July 26, 2023, 7:38pm UTC](https://forum.onefinitycnc.com/t/the-perfect-combination/21618 "2023-07-26T19:38:58Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Buddy](https://avatars.discourse-cdn.com/v4/letter/b/e5b9ba/32.png) [@Buddy](https://forum.onefinitycnc.com/u/Buddy)\
**Post date:** [July 26, 2023, 7:38pm UTC](https://forum.onefinitycnc.com/t/the-perfect-combination/21618/1 "2023-07-26T19:38:58Z")

</div>

I love my waste board layout and my 3D printer combination.

 ![363324481_240781265449241_6391896108537055497_n](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/8/2/820fe9d237a26f94af5dc1ca3b990213c051a606.jpeg)

 ![363329542_598075385872637_8630459007700042653_n](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/7/6/768c9440d556aabaf271693bc7e07b1c89c8e13d.jpeg)

---

<div class="post-metadata">

**Author:** ![ScottW](https://avatars.discourse-cdn.com/v4/letter/s/53a042/32.png) [@ScottW](https://forum.onefinitycnc.com/u/ScottW)\
**Post date:** [August 3, 2023, 5:26pm UTC](https://forum.onefinitycnc.com/t/the-perfect-combination/21618/2 "2023-08-03T17:26:57Z")

</div>

Where did you find these type of clamps? I have not seen them. I am always trying new clamps that work well with T tracks. The 2nd picture I do not see how they work and why 4 other screws?

---

<div class="post-metadata">

**Author:** ![HardtailSr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/hardtailsr/32/35326_2.png) [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)\
**Post date:** [August 3, 2023, 5:35pm UTC](https://forum.onefinitycnc.com/t/the-perfect-combination/21618/3 "2023-08-03T17:35:05Z")

</div>

I made these clamps and they work extremly well. I have never hit one yet due to their very low exposure. let me know if you have any questions

![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/e/1/e1ec44a8a7e0262e14ae289ebb02f97e1d9186ed.jpeg)

---

<div class="post-metadata">

**Author:** ![SurfinGump](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/surfingump/32/7699_2.png) [@SurfinGump](https://forum.onefinitycnc.com/u/SurfinGump)\
**Post date:** [August 4, 2023, 3:36am UTC](https://forum.onefinitycnc.com/t/the-perfect-combination/21618/4 "2023-08-04T03:36:11Z")

</div>

Questions:

Feeds/speeds/bits?

Lubrication?

How did you handle the metal shavings going everywhere, like into the bearings of the machine?

---

<div class="post-metadata">

**Author:** ![HardtailSr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/hardtailsr/32/35326_2.png) [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)\
**Post date:** [August 4, 2023, 12:21pm UTC](https://forum.onefinitycnc.com/t/the-perfect-combination/21618/5 "2023-08-04T12:21:07Z")

</div>

there was not very much of that due to light cuts and a low feed rate.

---

<div class="post-metadata">

**Author:** ![HardtailSr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/hardtailsr/32/35326_2.png) [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)\
**Post date:** [August 4, 2023, 12:26pm UTC](https://forum.onefinitycnc.com/t/the-perfect-combination/21618/6 "2023-08-04T12:26:01Z")

</div>

zero flute and lowest speed on makita router I forget what feed but not excesivley low

---

<div class="post-metadata">

**Author:** ![Buddy](https://avatars.discourse-cdn.com/v4/letter/b/e5b9ba/32.png) [@Buddy](https://forum.onefinitycnc.com/u/Buddy)\
**Post date:** [August 4, 2023, 8:13pm UTC](https://forum.onefinitycnc.com/t/the-perfect-combination/21618/7 "2023-08-04T20:13:56Z")

</div>

Hi Scott

I printed the clamps on my Prusa, the picture shows the options for holding down the clamps, the centre two are for using with a T track, the four other bolts are used the hold down the clamps using the inserts on the table,

---

<div class="post-metadata">

**Author:** ![HardtailSr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/hardtailsr/32/35326_2.png) [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)\
**Post date:** [August 5, 2023, 12:42pm UTC](https://forum.onefinitycnc.com/t/the-perfect-combination/21618/8 "2023-08-05T12:42:00Z")

</div>

i did not have much luck with printed clamps they kept bending and breaking. i bought them on etsy none were of any value. my aluminum one are still going strong
