# The Table basic

**URL:** https://forum.onefinitycnc.com/t/the-table-basic/3787
**Category:** Original/PRO Series (Buildbotics) (Gen 1)
**Created:** [February 24, 2021, 8:29pm UTC](https://forum.onefinitycnc.com/t/the-table-basic/3787 "2021-02-24T20:29:35Z")
**Posts on this page:** 1
**Showing post:** 75

<div class="post-metadata">

### Author: ![rcincorona](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/rcincorona/32/1470_2.png) [@rcincorona](https://forum.onefinitycnc.com/u/rcincorona)
#### Post date: [April 27, 2021, 9:04pm UTC](https://forum.onefinitycnc.com/t/the-table-basic/3787/75 "2021-04-27T21:04:07Z")

</div>

Hey @AndrewBrown  
I used 2 layers of 1/2” baltic for a total of 1” for 95% of it. Due to the design, it needed a little extra rigidity so i added 1/8” thick steel bands in a few strategic places. You can see a couple in the attached pic. Also added some elbows, trying not to add bulk inside where the vac hose will move around.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/a/a480d1ff500061c7e4ab6537712c33584918fcc7.jpeg)

---

_[View the full topic](https://forum.onefinitycnc.com/t/the-table-basic/3787)._