# Thinking outside the box (table) **URL:** \ **Category:** Gallery\ **Created:** [April 19, 2022, 7:46am UTC](https://forum.onefinitycnc.com/t/thinking-outside-the-box-table/12553 "2022-04-19T07:46:02Z")\ **Posts on this page:** 1\ **Showing post:** 1
**Author:** ![beukesphilip](https://avatars.discourse-cdn.com/v4/letter/b/77aa72/32.png) [@beukesphilip](https://forum.onefinitycnc.com/u/beukesphilip)\ **Post date:** [April 19, 2022, 7:46am UTC](https://forum.onefinitycnc.com/t/thinking-outside-the-box-table/12553/1 "2022-04-19T07:46:02Z")
This is my 1st project on my Onefinity. I first want to create a couple more projects like these before installing the waste board. I couldn’t find anyone else having this kind of setup, so here it is. The reason behind this is, we have a couple of logs outside that we use as small upright tables. But all of them are uneven, and just not flat, so your beer may tilt and fall off. So I figured the Onefinity would be the perfect machine to flatten these logs, maybe create a picture as well while we’re at it. Make a little inlay for a glass top, and then it would be a perfect leveled flat table that looks awesome! (can only load 1 picture according to the forum page, sorry) So I just made a wedge for the log, and use 2 straps top and bottom to pull it into the wedge. I took a photo from the top, digitized the outline, and surfaced the shape of the log. I have a video but I cannot upload videos here. (can only load 1 picture according to the forum page, sorry) Then after it was flat/surfaced, I just took a vector of a frog, made it 3d, and started with roughing, and finished with a finishing toolpath. ![20220417_105025](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/b/b/bb73c4431d89ca521538b0f54eb7a626f026d4bf.jpeg) Since this was my first project, I will next time use different bits, and even finer passes to have smoother finishes. I am very happy with my Onefinity. PS: I did some hacking on the touchscreen to rotate the display and the touch orientation so I can have my cables run on the left side of the screen. --- _[View the full topic](https://forum.onefinitycnc.com/t/thinking-outside-the-box-table/12553)._