# Tiling in CarveCo Maker

**URL:** <https://forum.onefinitycnc.com/t/tiling-in-carveco-maker/3741>\
**Category:** Carveco\
**Created:** [February 22, 2021, 6:18pm UTC](https://forum.onefinitycnc.com/t/tiling-in-carveco-maker/3741 "2021-02-22T18:18:44Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![psal217050](https://avatars.discourse-cdn.com/v4/letter/p/f14d63/32.png) [@psal217050](https://forum.onefinitycnc.com/u/psal217050)\
**Post date:** [February 22, 2021, 6:18pm UTC](https://forum.onefinitycnc.com/t/tiling-in-carveco-maker/3741/1 "2021-02-22T18:18:44Z")

</div>

I just got CarveCo Maker. Am I correct that tiling can only be done in Maker + or CarveCo?

What other programs are reasonably priced that allow tiling?  
Pete

---

<div class="post-metadata">

**Author:** ![alden](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/alden/32/161_2.png) [@alden](https://forum.onefinitycnc.com/u/alden)\
**Post date:** [February 23, 2021, 12:25am UTC](https://forum.onefinitycnc.com/t/tiling-in-carveco-maker/3741/2 "2021-02-23T00:25:09Z")

</div>

VCarve can do tiling.

---

<div class="post-metadata">

**Author:** ![psal217050](https://avatars.discourse-cdn.com/v4/letter/p/f14d63/32.png) [@psal217050](https://forum.onefinitycnc.com/u/psal217050)\
**Post date:** [February 23, 2021, 12:37am UTC](https://forum.onefinitycnc.com/t/tiling-in-carveco-maker/3741/3 "2021-02-23T00:37:41Z")

</div>

Thank you. I downloaded the trial version of Vcarve Pro and am also trying to learn Carveco Maker. So far the Vcarve seems to be a bit easier. And some of the projects I want to do will exceed the 1F working size of 32 inches.