# Tool library settings

**URL:** <https://forum.onefinitycnc.com/t/tool-library-settings/37292>\
**Category:** Feature Request\
**Created:** [January 24, 2026, 9:12pm UTC](https://forum.onefinitycnc.com/t/tool-library-settings/37292 "2026-01-24T21:12:17Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![LFwood](https://avatars.discourse-cdn.com/v4/letter/l/f08c70/32.png) [@LFwood](https://forum.onefinitycnc.com/u/LFwood)\
**Post date:** [January 24, 2026, 9:12pm UTC](https://forum.onefinitycnc.com/t/tool-library-settings/37292/1 "2026-01-24T21:12:17Z")

</div>

please add a tool library setting similar to how Haas does it with setting what tool is what such as t1 is a surfacing bit t2 is a 1/2” endmill etc

---

<div class="post-metadata">

**Author:** ![RTCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/rtcnc/32/33487_2.png) [@RTCNC](https://forum.onefinitycnc.com/u/RTCNC)\
**Post date:** [January 26, 2026, 3:27pm UTC](https://forum.onefinitycnc.com/t/tool-library-settings/37292/2 "2026-01-26T15:27:25Z")

</div>

Thanks for the suggestion. We are working on improving the tool table support in the software. I will make sure that tool descriptions are investigated as well.