# Toolsetter and ATC for Redline

**URL:** <https://forum.onefinitycnc.com/t/toolsetter-and-atc-for-redline/37263>\
**Category:** Elite Series (Masso & Redline) (Gen 1)\
**Created:** [January 21, 2026, 11:32pm UTC](https://forum.onefinitycnc.com/t/toolsetter-and-atc-for-redline/37263 "2026-01-21T23:32:25Z")\
**Posts on this page:** 1\
**Showing post:** 15

<div class="post-metadata">

**Author:** ![UltraPeepi](https://avatars.discourse-cdn.com/v4/letter/u/fbc32d/32.png) [@UltraPeepi](https://forum.onefinitycnc.com/u/UltraPeepi)\
**Post date:** [February 8, 2026, 6:06pm UTC](https://forum.onefinitycnc.com/t/toolsetter-and-atc-for-redline/37263/15 "2026-02-08T18:06:56Z")

</div>

I am using a custom post process for FabexCNC

> [@Redline post processor for Fabex cnc? (solved)](https://forum.onefinitycnc.com/t/redline-post-processor-for-fabex-cnc-solved/35879):
>
> I use a Mac, Blender and FabEX CNC (formerly BlenderCAM). It supports a host of post processors. With my Buildbotics controller, I would use LinuxCNC and manually remove the M06 which apparently isn’t supported. Are there any open source post processors that are compatible with the Redline controller? It never crossed my mind when I order this Redline system, that there might be this issue. I have posted in the FabexCNC Matrix channel as well. frowning

---

_[View the full topic](https://forum.onefinitycnc.com/t/toolsetter-and-atc-for-redline/37263)._