# Toolsetter and ATC for Redline

**URL:** <https://forum.onefinitycnc.com/t/toolsetter-and-atc-for-redline/37263>\
**Category:** Elite Series (Masso & Redline) (Gen 1)\
**Created:** [January 21, 2026, 11:32pm UTC](https://forum.onefinitycnc.com/t/toolsetter-and-atc-for-redline/37263 "2026-01-21T23:32:25Z")\
**Posts on this page:** 1\
**Showing post:** 20

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [April 19, 2026, 4:38pm UTC](https://forum.onefinitycnc.com/t/toolsetter-and-atc-for-redline/37263/20 "2026-04-19T16:38:51Z")

</div>

The official Beta will be available Monday.

Here’s the official link to the thread.

> [@Easy ATC Software Beta for Realtime Controller (Official FAQ)](https://forum.onefinitycnc.com/t/easy-atc-software-beta/38210):
>
> Greetings Onefinity/ATC Community, We have been working with Onefinity, Redline and RapidChange to integrate native support for the Easy ATC into our controllers and software. In order to consolidate the discussion for the new Easy ATC support, we will be posting updates and answering questions on this thread. FAQ Which Easy ATC Magazines are supported? The first software release will support four slot Easy ATC magazines. These are classified as V1, V2, and V2.1. These models were sold by…

---

_[View the full topic](https://forum.onefinitycnc.com/t/toolsetter-and-atc-for-redline/37263)._