# Torsion box size

**URL:** <https://forum.onefinitycnc.com/t/torsion-box-size/26692>\
**Category:** Uncategorized\
**Created:** [April 25, 2024, 7:22pm UTC](https://forum.onefinitycnc.com/t/torsion-box-size/26692 "2024-04-25T19:22:32Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![GuyAshley](https://avatars.discourse-cdn.com/v4/letter/g/aeb1de/32.png) [@GuyAshley](https://forum.onefinitycnc.com/u/GuyAshley)\
**Post date:** [April 25, 2024, 7:22pm UTC](https://forum.onefinitycnc.com/t/torsion-box-size/26692/1 "2024-04-25T19:22:32Z")

</div>

Hi everyone, my first post here so hope you Onefinity users can give me some guidance?  
I am U.K. based and being semi retired am now working from a small home workshop, and am used to the discipline of utilising every centimetre (or inch if you are still imperial measurements)  
My available work space for a CNC is 55” x 42”  
I make end grain chopping boards, jewellery boxes and house name plates so I don’t believe I need a huge CNC.  
I am thinking the Onefinity Woodworker 32” x 32” will be sufficient for my needs but am trying to figure out what size torsion box would be required?  
I have seen some amazing wall mounted and drop down systems, but I would prefer to just have a static table set up within the space parameters I have?  
Any advice and guidance would be really appreciated.

---

<div class="post-metadata">

**Author:** ![Dirkus](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/dirkus/32/9060_2.png) [@Dirkus](https://forum.onefinitycnc.com/u/Dirkus)\
**Post date:** [April 25, 2024, 8:14pm UTC](https://forum.onefinitycnc.com/t/torsion-box-size/26692/2 "2024-04-25T20:14:59Z")

</div>

Check out the manuals found at [https://www.onefinitycnc.com/support](https://www.onefinitycnc.com/support)

The Woodworker has a minimum foot print of 44-1/16" x 45-7/8". I would suggest that an additional 4" each way to give you a 2" margin around the machine. You may need to consider a wall mount to run vertically rather than horizontal.

Dirk (aka Dirkus)

---

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [April 26, 2024, 12:18am UTC](https://forum.onefinitycnc.com/t/torsion-box-size/26692/3 "2024-04-26T00:18:32Z")

</div>

Hey Guy,

this is a frequently asked (and frequently answered) question. [See here](https://forum.onefinitycnc.com/t/elite-woodworker-table-size/19981/2).

Welcome to the forum!

---

<div class="post-metadata">

**Author:** ![AndyP](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/andyp/32/1106_2.png) [@AndyP](https://forum.onefinitycnc.com/u/AndyP)\
**Post date:** [April 26, 2024, 7:38am UTC](https://forum.onefinitycnc.com/t/torsion-box-size/26692/4 "2024-04-26T07:38:26Z")

</div>

Im sure i read somewhere about not mounting Elite machines vertically.

Dont make it from 25mm mdf. Weighs a ton. I have a journeyman and i could not lift it on my own

---

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [April 26, 2024, 9:48am UTC](https://forum.onefinitycnc.com/t/torsion-box-size/26692/5 "2024-04-26T09:48:24Z")

</div>

Hey Andy, hey all,

it’s written here:

“[The wall mount is NOT compatible with any ELITE Series Machines.](https://www.onefinitycnc.com/product-page/wall-mount-kit)”

However I read in the forum that some people doubt that it’s not possible.

The difference between Elite and PRO Series are the stepper motors and the CNC controller.

I like Lee’s @TDE [Fold Down Wall Mounted CNC Table](https://forum.onefinitycnc.com/t/fold-down-wall-mounted-cnc-table/4783) or William’s @WmColl46 [flippable table with vertical clamping possibility](https://forum.onefinitycnc.com/t/box-joints-and-dovetails/7147/45).

See also

- [Poll: How often do you store the machine in the flipped up state?](https://forum.onefinitycnc.com/t/poll-how-often-do-you-store-the-machine-in-the-flipped-up-state/20841)
