# Touch probe mount

**URL:** <https://forum.onefinitycnc.com/t/touch-probe-mount/16729>\
**Category:** Community Created Accessories\
**Created:** [November 26, 2022, 4:51am UTC](https://forum.onefinitycnc.com/t/touch-probe-mount/16729 "2022-11-26T04:51:34Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mikemakes](https://avatars.discourse-cdn.com/v4/letter/m/e480ec/32.png) [@Mikemakes](https://forum.onefinitycnc.com/u/Mikemakes)\
**Post date:** [November 26, 2022, 4:51am UTC](https://forum.onefinitycnc.com/t/touch-probe-mount/16729/1 "2022-11-26T04:51:34Z")

</div>

1F touch probe mount with inserts. Everything is scaled so just print and go. I recommend turning the speed down for the inserts and print at a higher quality (better than .02) layer height. For the mount itself, print that with 20% infill. No supports needed.  
[https://www.printables.com/model/324437-onefinity-touch-probe-mount/files](https://www.printables.com/model/324437-onefinity-touch-probe-mount/files)

 ![20221125_153142](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/3/1/3104b9bb4e0927ca67e4b1a4c7182bf4fe6dccb6.jpeg)  
 ![20221125_153148](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/4/c/4c3d6de59da20f31ebad0449b184ca4edd5149ad.jpeg)