# Touch screen is frozen

**URL:** <https://forum.onefinitycnc.com/t/touch-screen-is-frozen/6862>\
**Category:** Uncategorized\
**Created:** [July 24, 2021, 11:18pm UTC](https://forum.onefinitycnc.com/t/touch-screen-is-frozen/6862 "2021-07-24T23:18:04Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![ximpa1](https://avatars.discourse-cdn.com/v4/letter/x/a183cd/32.png) [@ximpa1](https://forum.onefinitycnc.com/u/ximpa1)\
**Post date:** [July 24, 2021, 11:18pm UTC](https://forum.onefinitycnc.com/t/touch-screen-is-frozen/6862/1 "2021-07-24T23:18:05Z")

</div>

I received my OneFinity today. Everything seems working, but the 10.5" touch screen does not respond to my finger, it is frozen. Do I need a mouse for the first setup, or is anything I need to do to unfreeze it?

---

<div class="post-metadata">

**Author:** ![Dustydave](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/dustydave/32/1776_2.png) [@Dustydave](https://forum.onefinitycnc.com/u/Dustydave)\
**Post date:** [July 24, 2021, 11:32pm UTC](https://forum.onefinitycnc.com/t/touch-screen-is-frozen/6862/2 "2021-07-24T23:32:24Z")

</div>

Try turning on your controller first wait a min. then power up your monitor .

---

<div class="post-metadata">

**Author:** ![ximpa1](https://avatars.discourse-cdn.com/v4/letter/x/a183cd/32.png) [@ximpa1](https://forum.onefinitycnc.com/u/ximpa1)\
**Post date:** [July 26, 2021, 10:11pm UTC](https://forum.onefinitycnc.com/t/touch-screen-is-frozen/6862/3 "2021-07-26T22:11:18Z")

</div>

Thank you David. I’ll try that right now.

---

<div class="post-metadata">

**Author:** ![AndyP](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/andyp/32/1106_2.png) [@AndyP](https://forum.onefinitycnc.com/u/AndyP)\
**Post date:** [July 27, 2021, 8:43am UTC](https://forum.onefinitycnc.com/t/touch-screen-is-frozen/6862/4 "2021-07-27T08:43:18Z")

</div>

Check your USB cables are in the correct ports.

---

<div class="post-metadata">

**Author:** ![ximpa1](https://avatars.discourse-cdn.com/v4/letter/x/a183cd/32.png) [@ximpa1](https://forum.onefinitycnc.com/u/ximpa1)\
**Post date:** [July 27, 2021, 10:24pm UTC](https://forum.onefinitycnc.com/t/touch-screen-is-frozen/6862/5 "2021-07-27T22:24:56Z")

</div>

Thank you AndyP. Dustydave advises worked.

---

<div class="post-metadata">

**Author:** ![AndyP](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/andyp/32/1106_2.png) [@AndyP](https://forum.onefinitycnc.com/u/AndyP)\
**Post date:** [October 2, 2021, 3:35pm UTC](https://forum.onefinitycnc.com/t/touch-screen-is-frozen/6862/6 "2021-10-02T15:35:01Z")

</div>

Oh dear - Onefinity working fine then today, the screen ceases to respond to touch. I have tried all the “magic” recipes above (switch off, wait, then switch the screen on), but the “Touch” aspect of the screen no longer works. I can use a mouse and access from another pc/laptop, but the screen doesn’t respond to touch.

Any other magic recipes?

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [October 2, 2021, 6:37pm UTC](https://forum.onefinitycnc.com/t/touch-screen-is-frozen/6862/7 "2021-10-02T18:37:56Z")

</div>

you can use a mouse, just plug it into the usb on the back of the controller. what size screen do you have?

---

<div class="post-metadata">

**Author:** ![AndyP](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/andyp/32/1106_2.png) [@AndyP](https://forum.onefinitycnc.com/u/AndyP)\
**Post date:** [October 2, 2021, 7:06pm UTC](https://forum.onefinitycnc.com/t/touch-screen-is-frozen/6862/8 "2021-10-02T19:06:10Z")

</div>

10 inch, the big one.

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [June 2, 2023, 6:44pm UTC](https://forum.onefinitycnc.com/t/touch-screen-is-frozen/6862/10 "2023-06-02T18:44:29Z")

</div>

Greg,  
We responded to your email 5/19/23 1 minute after you emailed us. You never responded. We sent 3 follow up emails to you in the next three days and you never responded.
