# Touch screen upside down?

**URL:** <https://forum.onefinitycnc.com/t/touch-screen-upside-down/12099>\
**Category:** Uncategorized\
**Created:** [March 29, 2022, 1:57am UTC](https://forum.onefinitycnc.com/t/touch-screen-upside-down/12099 "2022-03-29T01:57:51Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jarrodh](https://avatars.discourse-cdn.com/v4/letter/j/ecae2f/32.png) [@Jarrodh](https://forum.onefinitycnc.com/u/Jarrodh)\
**Post date:** [March 29, 2022, 1:57am UTC](https://forum.onefinitycnc.com/t/touch-screen-upside-down/12099/1 "2022-03-29T01:57:51Z")

</div>

I just recently received my Journeyman X-50 which came with the ImageDok 8" screen. All the clips I have seen on Youtube show everyones cables coming out of the left hand side of the monitor. Mine however is the opposite. That is when the screen is turned on with cables coming out of the left the image on the screen is upside down. Is there a simple fix?  
Many thanks…

---

<div class="post-metadata">

**Author:** ![JimHatch](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/jimhatch/32/3928_2.png) [@JimHatch](https://forum.onefinitycnc.com/u/JimHatch)\
**Post date:** [March 29, 2022, 3:44pm UTC](https://forum.onefinitycnc.com/t/touch-screen-upside-down/12099/2 "2022-03-29T15:44:35Z")

</div>

> [@Jarrodh](#):
>
> All the clips I have seen on Youtube show everyones cables coming out of the left hand side of the monitor.

Mine come out the right side.

There is a way to flip the image - there have been a few posts on how to do it. You have to make changes to the RPi configuration using the command line.

---

<div class="post-metadata">

**Author:** ![m700](https://avatars.discourse-cdn.com/v4/letter/m/76d3ee/32.png) [@m700](https://forum.onefinitycnc.com/u/m700)\
**Post date:** [March 29, 2022, 3:50pm UTC](https://forum.onefinitycnc.com/t/touch-screen-upside-down/12099/3 "2022-03-29T15:50:07Z")

</div>

I didnt flip mine and wires come out the right.

May be easier to just flip monitor, found this thread

> [@Flip 10" display 180 degrees (works, but not supported by Onefinity)](https://forum.onefinitycnc.com/t/flip-10-display-180-degrees-works-but-not-supported-by-onefinity/5430/17):
>
> I hope they ship mine loose so I get a choice of using the supplied mount or something else.

---

<div class="post-metadata">

**Author:** ![Jarrodh](https://avatars.discourse-cdn.com/v4/letter/j/ecae2f/32.png) [@Jarrodh](https://forum.onefinitycnc.com/u/Jarrodh)\
**Post date:** [March 29, 2022, 8:49pm UTC](https://forum.onefinitycnc.com/t/touch-screen-upside-down/12099/4 "2022-03-29T20:49:20Z")

</div>

Thanks Jim. Its nice to no its not just me. Have a great day.

---

<div class="post-metadata">

**Author:** ![Jarrodh](https://avatars.discourse-cdn.com/v4/letter/j/ecae2f/32.png) [@Jarrodh](https://forum.onefinitycnc.com/u/Jarrodh)\
**Post date:** [March 29, 2022, 8:50pm UTC](https://forum.onefinitycnc.com/t/touch-screen-upside-down/12099/5 "2022-03-29T20:50:26Z")

</div>

Hi George, Yes I found this post and read through the thread. I wasn’t game to try this. Thanks for the reply. Have a great day!!