# Touchscreen mount

**URL:** <https://forum.onefinitycnc.com/t/touchscreen-mount/10057>\
**Category:** TouchScreen\
**Created:** [January 4, 2022, 2:45pm UTC](https://forum.onefinitycnc.com/t/touchscreen-mount/10057 "2022-01-04T14:45:22Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jaccccw](https://avatars.discourse-cdn.com/v4/letter/j/838e76/32.png) [@Jaccccw](https://forum.onefinitycnc.com/u/Jaccccw)\
**Post date:** [January 4, 2022, 2:45pm UTC](https://forum.onefinitycnc.com/t/touchscreen-mount/10057/1 "2022-01-04T14:45:22Z")

</div>

> **[Onefinity touch screen arm](https://www.inventables.com/projects/onefinity-touch-screen-arm)**
>
> I decided to make an arm that would raise my touch screen and move it over to the side a little bit so I would not knock it off with my dust boot i did not notice the spelling mistake until it was to late oh well it...