# Touchscreen recommendation

**URL:** <https://forum.onefinitycnc.com/t/touchscreen-recommendation/33789>\
**Category:** Uncategorized\
**Created:** [June 10, 2025, 6:06pm UTC](https://forum.onefinitycnc.com/t/touchscreen-recommendation/33789 "2025-06-10T18:06:08Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![iansnow](https://avatars.discourse-cdn.com/v4/letter/i/ea666f/32.png) [@iansnow](https://forum.onefinitycnc.com/u/iansnow)\
**Post date:** [June 10, 2025, 6:06pm UTC](https://forum.onefinitycnc.com/t/touchscreen-recommendation/33789/1 "2025-06-10T18:06:08Z")

</div>

Hi All,  
The 32" Original I bought (used) came with a small Onefinity touchscreen and a larger non-OF touchscreen. The problem I’m having is that the small screen is too small for my eyes and fat fingers, and the larger (not from Onefinity) is…mis calibrated(?) and I have to touch the screen 1/2" to 1" below what I’m trying to select, causing a LOT of incorrect selections.  
Can you recommend a large touchscreen (16", 18" ?) that works well with Onefinity?  
Thanks,  
Ian

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [June 10, 2025, 6:09pm UTC](https://forum.onefinitycnc.com/t/touchscreen-recommendation/33789/2 "2025-06-10T18:09:53Z")

</div>

> [@What screens can I use with the Onefinity CNC (with a BB Buildbotics controller)](https://forum.onefinitycnc.com/t/what-screens-can-i-use-with-the-onefinity-cnc-with-a-bb-buildbotics-controller/9247):
>
> This FAQ is only applicable to Onefinity Machines with the BB (buildbotics) controller. It does not apply to Elite Machines with Masso controller. Specifics on the Onefinity screen requirements: There is nothing special about the screen used on the Onefinity CNC. It is simply a small sized monitor/tv that has touch input. It’s no different than the TV you have in your home, in fact, you could even use your home tv as the screen for the Onefinity! The only requirements for the screen is that…

---

<div class="post-metadata">

**Author:** ![SailorMike](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/sailormike/32/3290_2.png) [@SailorMike](https://forum.onefinitycnc.com/u/SailorMike)\
**Post date:** [June 10, 2025, 8:57pm UTC](https://forum.onefinitycnc.com/t/touchscreen-recommendation/33789/3 "2025-06-10T20:57:00Z")

</div>

I’m pretty happy with my ViewSonic 15" touchscreen. It has its own little stand, and a dust cover to flip over the screen when not in use. I’ve had no problem with it for the last 2 years. They’ve got other sizes as well.

---

<div class="post-metadata">

**Author:** ![iansnow](https://avatars.discourse-cdn.com/v4/letter/i/ea666f/32.png) [@iansnow](https://forum.onefinitycnc.com/u/iansnow)\
**Post date:** [June 10, 2025, 9:14pm UTC](https://forum.onefinitycnc.com/t/touchscreen-recommendation/33789/4 "2025-06-10T21:14:02Z")

</div>

Excellent! That will work. Thanks Michael.  
Ian