# Tramming 80mm Spindle **URL:** https://forum.onefinitycnc.com/t/tramming-80mm-spindle/13090 **Category:** Uncategorized **Created:** [May 15, 2022, 12:33am UTC](https://forum.onefinitycnc.com/t/tramming-80mm-spindle/13090 "2022-05-15T00:33:57Z") **Posts on this page:** 1 **Showing post:** 3
### Author: ![makerjace](https://avatars.discourse-cdn.com/v4/letter/m/e47c2d/32.png) [@makerjace](https://forum.onefinitycnc.com/u/makerjace) #### Post date: [May 15, 2022, 12:39am UTC](https://forum.onefinitycnc.com/t/tramming-80mm-spindle/13090/3 "2022-05-15T00:39:11Z")
> [@Tramming issues on x50 80mm](https://forum.onefinitycnc.com/t/tramming-issues-on-x50-80mm/11448): > > I have a Journeyman 50 wall mounted in a qcw frame with 2.2kw spindle. I laid out a wasteboard flattening file and ran it with 2" flattening bit the result was a ridge I could fully catch on fingernail and the machine stopped before it reached the end of job. I believe my drag chain was set a bit too tight when the x rail moves all the way to the left(back if it were flat). That is an easy fix. The spindle was out left to right(front to back if it were flat). I was able to get it trammed by add… --- _[View the full topic](https://forum.onefinitycnc.com/t/tramming-80mm-spindle/13090)._