# Tramming the Router

**URL:** <https://forum.onefinitycnc.com/t/tramming-the-router/1132>\
**Category:** Troubleshooting (X35/X50)\
**Created:** [October 4, 2020, 9:55pm UTC](https://forum.onefinitycnc.com/t/tramming-the-router/1132 "2020-10-04T21:55:49Z")\
**Posts on this page:** 1\
**Showing post:** 40

<div class="post-metadata">

**Author:** ![valford](https://avatars.discourse-cdn.com/v4/letter/v/c6cbf5/32.png) [@valford](https://forum.onefinitycnc.com/u/valford)\
**Post date:** [March 8, 2021, 2:33am UTC](https://forum.onefinitycnc.com/t/tramming-the-router/1132/40 "2021-03-08T02:33:17Z")

</div>

I just used a piece of 1/4 inch steel rod with two approx. 90 degree bends and an old set of automotive feeler guages ![tramming](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/a/8/a8daf08ffb8a2fed43666d5b67d45a6aab2f6a20.jpeg)

---

_[View the full topic](https://forum.onefinitycnc.com/t/tramming-the-router/1132)._