# Trial VCARVE Pro to Paid

**URL:** <https://forum.onefinitycnc.com/t/trial-vcarve-pro-to-paid/16189>\
**Category:** Vectric\
**Created:** [October 31, 2022, 3:44pm UTC](https://forum.onefinitycnc.com/t/trial-vcarve-pro-to-paid/16189 "2022-10-31T15:44:05Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![GeneO](https://avatars.discourse-cdn.com/v4/letter/g/f19dbf/32.png) [@GeneO](https://forum.onefinitycnc.com/u/GeneO)\
**Post date:** [October 31, 2022, 3:44pm UTC](https://forum.onefinitycnc.com/t/trial-vcarve-pro-to-paid/16189/1 "2022-10-31T15:44:05Z")

</div>

Does anyone know if you try VCARVE Pro, when you purchase it, can you buy it through Onefinity (which saves ~$70) or do you have to buy through Vectric?

---

<div class="post-metadata">

**Author:** ![Dunlow](https://avatars.discourse-cdn.com/v4/letter/d/46a35a/32.png) [@Dunlow](https://forum.onefinitycnc.com/u/Dunlow)\
**Post date:** [October 31, 2022, 4:15pm UTC](https://forum.onefinitycnc.com/t/trial-vcarve-pro-to-paid/16189/3 "2022-10-31T16:15:41Z")

</div>

You do not have to buy from Vectric. Once you make the purchase from Onefinity, a code will be emailed to you. You will enter the purchased code into the trial software you already have installed. This will enable the full features of the software.

---

<div class="post-metadata">

**Author:** ![GeneO](https://avatars.discourse-cdn.com/v4/letter/g/f19dbf/32.png) [@GeneO](https://forum.onefinitycnc.com/u/GeneO)\
**Post date:** [October 31, 2022, 4:51pm UTC](https://forum.onefinitycnc.com/t/trial-vcarve-pro-to-paid/16189/4 "2022-10-31T16:51:44Z")

</div>

Thank you. Vectric site says the trial is a full version and I will most likely go with VCARVE Pro just for the ease and You Tube Vids on its use.

---

<div class="post-metadata">

**Author:** ![WmColl46](https://avatars.discourse-cdn.com/v4/letter/w/35a633/32.png) [@WmColl46](https://forum.onefinitycnc.com/u/WmColl46)\
**Post date:** [October 31, 2022, 8:23pm UTC](https://forum.onefinitycnc.com/t/trial-vcarve-pro-to-paid/16189/5 "2022-10-31T20:23:21Z")

</div>

Unrelate, noticed the upgrade to Aspire from VCarve Pro on the Vectric site…on the world market there is quite a difference in the Pound and Dollar exchange rate, with Vectric’s listed prices, it’s a nice deal if I could only figure out how to pay in Pounds.