# Unwanted Pause between toolpathsF360 and Masso

**URL:** <https://forum.onefinitycnc.com/t/unwanted-pause-between-toolpathsf360-and-masso/29774>\
**Category:** Elite Series (Masso & Redline) (Gen 1)\
**Created:** [December 3, 2024, 7:45pm UTC](https://forum.onefinitycnc.com/t/unwanted-pause-between-toolpathsf360-and-masso/29774 "2024-12-03T19:45:56Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![blaghislain](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/blaghislain/32/33736_2.png) [@blaghislain](https://forum.onefinitycnc.com/u/blaghislain)\
**Post date:** [December 4, 2024, 1:43pm UTC](https://forum.onefinitycnc.com/t/unwanted-pause-between-toolpathsf360-and-masso/29774/7 "2024-12-04T13:43:09Z")

</div>

see my reply [here](https://forum.onefinitycnc.com/t/configure-masso-to-check-if-vfd-is-on/26976/11) for the gcode inserted

---

_[View the full topic](https://forum.onefinitycnc.com/t/unwanted-pause-between-toolpathsf360-and-masso/29774)._