# UPS for Controller and Display

**URL:** <https://forum.onefinitycnc.com/t/ups-for-controller-and-display/10571>\
**Category:** Uncategorized\
**Created:** [January 22, 2022, 3:18am UTC](https://forum.onefinitycnc.com/t/ups-for-controller-and-display/10571 "2022-01-22T03:18:32Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [January 22, 2022, 3:55pm UTC](https://forum.onefinitycnc.com/t/ups-for-controller-and-display/10571/6 "2022-01-22T15:55:19Z")

</div>

Hey Ziggy,

> [@Ziggy](#):
>
> I had read elsewhere on the forum that it was possible to connect the UPS to the controller and possibly halt the program in the event of a power failure.

[it was here](https://forum.onefinitycnc.com/t/work-with-a-ups/8963/5)

And as for switching the router off by the CNC Controller, [see here](https://forum.onefinitycnc.com/t/onefinty-control-panel-remote-gamepad-replacement-with-lots-of-extra-options/8060/124)

---

_[View the full topic](https://forum.onefinitycnc.com/t/ups-for-controller-and-display/10571)._