# V-Carve Pro making the Skull

**URL:** <https://forum.onefinitycnc.com/t/v-carve-pro-making-the-skull/32061>\
**Category:** Onefinity Rotary 4th Axis 'The Revolution'\
**Created:** [March 30, 2025, 8:51pm UTC](https://forum.onefinitycnc.com/t/v-carve-pro-making-the-skull/32061 "2025-03-30T20:51:20Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![kdnickels](https://avatars.discourse-cdn.com/v4/letter/k/e5b9ba/32.png) [@kdnickels](https://forum.onefinitycnc.com/u/kdnickels)\
**Post date:** [March 30, 2025, 8:51pm UTC](https://forum.onefinitycnc.com/t/v-carve-pro-making-the-skull/32061/1 "2025-03-30T20:51:20Z")

</div>

I watched the OneFinity making the skull on you tube. the questions I have:

1. where to start, how to do it (would like general steps please or a video)
2. Is the skull model available for down load?
3. Can this be done with any STL model that is found (like thingiverse)
4. what bit set would be the best to use/by
5. could the raw material be a log  
thanks

---

<div class="post-metadata">

**Author:** ![3D-CNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/3d-cnc/32/33076_2.png) [@3D-CNC](https://forum.onefinitycnc.com/u/3D-CNC)\
**Post date:** [March 31, 2025, 1:29pm UTC](https://forum.onefinitycnc.com/t/v-carve-pro-making-the-skull/32061/2 "2025-03-31T13:29:27Z")

</div>

Do you have the 4th axis? What programming software are you using? You can cut any stl model, but you might have to flip it several times if you do not have a rotary. As far as using a log, how big of log are you talking about?

There are lots of variables here that would need to be answered before anyone can give you the advise you are looking for. If you have never done a 3D carve, I would stick with something easier like a one sided job first. Then work your way up to a rotary. Just my opinion. The bit you would want to use it a small tappered ballnose like the skinny Jenny or something similar. The smaller the tip the more detail you will get.

---

<div class="post-metadata">

**Author:** ![kdnickels](https://avatars.discourse-cdn.com/v4/letter/k/e5b9ba/32.png) [@kdnickels](https://forum.onefinitycnc.com/u/kdnickels)\
**Post date:** [April 1, 2025, 6:08pm UTC](https://forum.onefinitycnc.com/t/v-carve-pro-making-the-skull/32061/3 "2025-04-01T18:08:32Z")

</div>

Hello Michael  
I do not have one yet, has been ordered, 12 weeks out.  
I have Vcarve Pro,have thought about upgrading to Aspire, and a 3D camera for generating STL’s  
have just started to learn Blender (because it is free)  
have high hopes but willing to try and play  
Yes I have seen the rotate option that you are talking about

---

<div class="post-metadata">

**Author:** ![3D-CNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/3d-cnc/32/33076_2.png) [@3D-CNC](https://forum.onefinitycnc.com/u/3D-CNC)\
**Post date:** [April 1, 2025, 6:13pm UTC](https://forum.onefinitycnc.com/t/v-carve-pro-making-the-skull/32061/4 "2025-04-01T18:13:15Z")

</div>

I have modified a model in blender but that was the extent of my knowledge with it. I do know Catia, NX, and vcarve pro. I would like to upgrade to Aspire as well. Good luck on your journey. Hopefully you get your machine soon.
