# Vacuum boom height?

**URL:** <https://forum.onefinitycnc.com/t/vacuum-boom-height/3952>\
**Category:** Onefinity Suckit Vacuum Hose and Router Cable Boom\
**Created:** [March 2, 2021, 11:34am UTC](https://forum.onefinitycnc.com/t/vacuum-boom-height/3952 "2021-03-02T11:34:33Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![AndrewBrown](https://avatars.discourse-cdn.com/v4/letter/a/a8b319/32.png) [@AndrewBrown](https://forum.onefinitycnc.com/u/AndrewBrown)\
**Post date:** [March 2, 2021, 11:34am UTC](https://forum.onefinitycnc.com/t/vacuum-boom-height/3952/1 "2021-03-02T11:34:33Z")

</div>

Hi all, what is the height of the vacuum boom? From the table to the top of the hose.  
Thanks in advance

---

<div class="post-metadata">

**Author:** ![RowdyRoman](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/rowdyroman/32/14_2.png) [@RowdyRoman](https://forum.onefinitycnc.com/u/RowdyRoman)\
**Post date:** [March 3, 2021, 11:42am UTC](https://forum.onefinitycnc.com/t/vacuum-boom-height/3952/2 "2021-03-03T11:42:44Z")

</div>

Hey Andrew from the bottom of the feet of the Onefinity to the top of the boom with a 2.5” hose is 27.5”

---

<div class="post-metadata">

**Author:** ![AndrewBrown](https://avatars.discourse-cdn.com/v4/letter/a/a8b319/32.png) [@AndrewBrown](https://forum.onefinitycnc.com/u/AndrewBrown)\
**Post date:** [March 3, 2021, 9:08pm UTC](https://forum.onefinitycnc.com/t/vacuum-boom-height/3952/3 "2021-03-03T21:08:03Z")

</div>

Great. Thanks for the info. .

---

<div class="post-metadata">

**Author:** ![cyberreefguru](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/cyberreefguru/32/27385_2.png) [@cyberreefguru](https://forum.onefinitycnc.com/u/cyberreefguru)\
**Post date:** [March 3, 2021, 9:52pm UTC](https://forum.onefinitycnc.com/t/vacuum-boom-height/3952/4 "2021-03-03T21:52:03Z")

</div>

I’ll just offer, the boom is whatever height you want it to be, know what I mean? There are obviously practical limits, but it’s your machine, so chose what works for you.

0.02

---

<div class="post-metadata">

**Author:** ![AndrewBrown](https://avatars.discourse-cdn.com/v4/letter/a/a8b319/32.png) [@AndrewBrown](https://forum.onefinitycnc.com/u/AndrewBrown)\
**Post date:** [March 3, 2021, 10:39pm UTC](https://forum.onefinitycnc.com/t/vacuum-boom-height/3952/5 "2021-03-03T22:39:22Z")

</div>

Thanks. I appreciate you could cut the tube to whatever length. I’m trying to get an idea of height for an enclosure. 🙂

---

<div class="post-metadata">

**Author:** ![RowdyRoman](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/rowdyroman/32/14_2.png) [@RowdyRoman](https://forum.onefinitycnc.com/u/RowdyRoman)\
**Post date:** [March 11, 2021, 2:01pm UTC](https://forum.onefinitycnc.com/t/vacuum-boom-height/3952/6 "2021-03-11T14:01:31Z")

</div>

Need to be careful here. I tried many different heights and what I have it as has worked the best. However if you do an enclosure like Ben Myers. His vacuum hose starts high in the enclosure and was therefore able to shorten the height of the boom.
