# VCarve Export/Import Load Toolpath Bug **URL:** \ **Category:** Vectric\ **Created:** [February 13, 2022, 1:20pm UTC](https://forum.onefinitycnc.com/t/vcarve-export-import-load-toolpath-bug/11167 "2022-02-13T13:20:07Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![pwsusi](https://avatars.discourse-cdn.com/v4/letter/p/ee59a6/32.png) [@pwsusi](https://forum.onefinitycnc.com/u/pwsusi)\ **Post date:** [February 13, 2022, 1:20pm UTC](https://forum.onefinitycnc.com/t/vcarve-export-import-load-toolpath-bug/11167/1 "2022-02-13T13:20:07Z")
Has anyone noticed the following bug in VCarve? If you create some toolpaths and group them together, when you export them and import them into another project the grouping/hierarchy of toolpaths is lost and you have a real mess to try to figure out how to reassemble everything Here’s a real simple example for illustrative purposes, but in a real world project with many toolpaths/groups it’s much worse. It’s a nice feature essential to keeping things well organized…too bad it doesn’t appear to work properly. Create the following toolpaths and export… ![Untitled](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/f/9/f9789344b472141e5051bddb78e3c6a8cdb6617b.png) Import into another project for reuse… ![Untitled2](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/0/b/0bbd4096833554dc65f77b98111d396a4385d69d.png)