# Vcarve pro and onefinity post processor **URL:** \ **Category:** J Tech Laser\ **Created:** [October 27, 2021, 11:55pm UTC](https://forum.onefinitycnc.com/t/vcarve-pro-and-onefinity-post-processor/8539 "2021-10-27T23:55:57Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Pa12pilot](https://avatars.discourse-cdn.com/v4/letter/p/35a633/32.png) [@Pa12pilot](https://forum.onefinitycnc.com/u/Pa12pilot)\ **Post date:** [October 27, 2021, 11:55pm UTC](https://forum.onefinitycnc.com/t/vcarve-pro-and-onefinity-post-processor/8539/1 "2021-10-27T23:55:57Z")
Ok all of you brilliant talented folks, out of the list of supported cnc machine post processors listed on the vectric laser add on section, which one do we choose for the onefinity post processor? The list does not include a onefinity choice. I want to get the jtec for my as yet undelivered Woodworker. Thanks ---
**Author:** ![Bob\_D](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/bob_d/32/4732_2.png) [@Bob\_D](https://forum.onefinitycnc.com/u/Bob_D)\ **Post date:** [October 29, 2021, 1:46pm UTC](https://forum.onefinitycnc.com/t/vcarve-pro-and-onefinity-post-processor/8539/2 "2021-10-29T13:46:23Z")
It’s not one of these? (VCarve Pro 11.0) ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/0/0499aec2b4c575b3797dcfbf266ea10239c6a747.png) ---
**Author:** ![Dustoff00](https://avatars.discourse-cdn.com/v4/letter/d/34f0e0/32.png) [@Dustoff00](https://forum.onefinitycnc.com/u/Dustoff00)\ **Post date:** [December 28, 2021, 6:42pm UTC](https://forum.onefinitycnc.com/t/vcarve-pro-and-onefinity-post-processor/8539/3 "2021-12-28T18:42:45Z")
Grab it straight from Jtech V2 version. > **[Vectric Laser Module Post Processors - J Tech Photonics, Inc.](https://jtechphotonics.com/?p=19034)** > > We have been a partner with Vectric on development of the new laser module for a couple of years now and we are happy to say they have released the new version. This new module will allow several new features in Vectric products to make it more... ---
**Author:** ![Bob\_D](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/bob_d/32/4732_2.png) [@Bob\_D](https://forum.onefinitycnc.com/u/Bob_D)\ **Post date:** [December 28, 2021, 8:27pm UTC](https://forum.onefinitycnc.com/t/vcarve-pro-and-onefinity-post-processor/8539/4 "2021-12-28T20:27:14Z")
That info is over a year old. So is this information still ‘new’? Meaning won’t those improved V2 PPs be included in current versions as I highlighted with v11.0 above? ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/6/8/680277c71080186611c3a5f0e1401f76f96c34ff.png) ---
**Author:** ![Bear](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/bear/32/30015_2.png) [@Bear](https://forum.onefinitycnc.com/u/Bear)\ **Post date:** [December 28, 2021, 8:36pm UTC](https://forum.onefinitycnc.com/t/vcarve-pro-and-onefinity-post-processor/8539/5 "2021-12-28T20:36:43Z")
Use these… ![Screenshot 2021-12-28 153501](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/8/b/8bdcd8c71576670159dadadc5283c97dd2393b44.png) Oppps… didn’t see it was a laser… ---
**Author:** ![Dwc](https://avatars.discourse-cdn.com/v4/letter/d/f19dbf/32.png) [@Dwc](https://forum.onefinitycnc.com/u/Dwc)\ **Post date:** [December 29, 2021, 4:29am UTC](https://forum.onefinitycnc.com/t/vcarve-pro-and-onefinity-post-processor/8539/6 "2021-12-29T04:29:45Z")
> [@Jtech Laser Post Processors for Vectric (Download Links Included) (Old thread, built into Vectric 11.0 and beyond)](https://forum.onefinitycnc.com/t/jtech-laser-post-processors-for-vectric-download-links-included-old-thread-built-into-vectric-11-0-and-beyond/702): > > If you are running Vectric 11 or newer, these are built into Vectic and you do not need to download and install these. Updated 6/17/21 Version (2.0): [Onefinity Laser (Inch) V2.pp](https://forum.onefinitycnc.com/uploads/short-url/6cnpPvOqPfRHusTKMgCNLmTBJc1.pp) (4.9 KB) [Onefinity\_Laser\_mm\_V2.pp](https://forum.onefinitycnc.com/uploads/short-url/tprhjAQqsgTR9jCh4JmM5OrAmE5.pp) (4.9 KB) Install these to use the Jtech Laser add on when using Vectric.