# Vcarve pro multi tool change

**URL:** <https://forum.onefinitycnc.com/t/vcarve-pro-multi-tool-change/25835>\
**Category:** Controller (MASSO) Discussion\
**Created:** [March 10, 2024, 6:42pm UTC](https://forum.onefinitycnc.com/t/vcarve-pro-multi-tool-change/25835 "2024-03-10T18:42:05Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Woodhacker](https://avatars.discourse-cdn.com/v4/letter/w/ac8455/32.png) [@Woodhacker](https://forum.onefinitycnc.com/u/Woodhacker)\
**Post date:** [March 10, 2024, 6:42pm UTC](https://forum.onefinitycnc.com/t/vcarve-pro-multi-tool-change/25835/1 "2024-03-10T18:42:05Z")

</div>

I upgraded from the BB controler to a masso, the BB controller is easy to use, but the masso controller is a different animal. I do alot of cutting boards with inlays using different cutters. I did a test run today and using a ¼em that worked fine until it finished it’s cycle waiting for masso to tell me to do a tool change. Well it didn’t go as planned, it slammed the ¼em in the tool setter and then it ask to do a tool change. Can someone tell me what went wrong.

---

<div class="post-metadata">

**Author:** ![Woodhacker](https://avatars.discourse-cdn.com/v4/letter/w/ac8455/32.png) [@Woodhacker](https://forum.onefinitycnc.com/u/Woodhacker)\
**Post date:** [March 11, 2024, 7:21pm UTC](https://forum.onefinitycnc.com/t/vcarve-pro-multi-tool-change/25835/3 "2024-03-11T19:21:47Z")

</div>

I have a tool setter from onefinity, want do people set the safe distance at. I had mine at -2.00 inches. I changed it to -1.00 and did a dry run and it seemed to make sense now.