# Vector resizing-recalculating isn't adjusting

**URL:** <https://forum.onefinitycnc.com/t/vector-resizing-recalculating-isnt-adjusting/29118>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [October 30, 2024, 9:41pm UTC](https://forum.onefinitycnc.com/t/vector-resizing-recalculating-isnt-adjusting/29118 "2024-10-30T21:41:25Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![PNWFarmhouseDesignCo](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/pnwfarmhousedesignco/32/29009_2.png) [@PNWFarmhouseDesignCo](https://forum.onefinitycnc.com/u/PNWFarmhouseDesignCo)\
**Post date:** [October 30, 2024, 9:41pm UTC](https://forum.onefinitycnc.com/t/vector-resizing-recalculating-isnt-adjusting/29118/1 "2024-10-30T21:41:25Z")

</div>

Hi all… I created a file that I will be doing a multiple eposy pours in different colors. My question…

I am doing a smaller version as a test…

I already have the toolpaths made for colors on the original, when I saved as, and re sized the vector… recalculated, however the size doesn’t change on the tool paths… am I missing something to have the toolpaths shrink with the resize of the vector…

Thanks in advance.  
Katrina  
Adventures.with.Katrina

---

<div class="post-metadata">

**Author:** ![Diesel\_ss](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/diesel_ss/32/29544_2.png) [@Diesel\_ss](https://forum.onefinitycnc.com/u/Diesel_ss)\
**Post date:** [October 31, 2024, 12:34am UTC](https://forum.onefinitycnc.com/t/vector-resizing-recalculating-isnt-adjusting/29118/2 "2024-10-31T00:34:11Z")

</div>

What software are you running?

---

<div class="post-metadata">

**Author:** ![Zetteboy1234](https://avatars.discourse-cdn.com/v4/letter/z/7ea924/32.png) [@Zetteboy1234](https://forum.onefinitycnc.com/u/Zetteboy1234)\
**Post date:** [November 2, 2024, 6:24pm UTC](https://forum.onefinitycnc.com/t/vector-resizing-recalculating-isnt-adjusting/29118/3 "2024-11-02T18:24:40Z")

</div>

Hallo  
Ich hab ein anderes problem  
Vieleicht hatt das jemand schon mal gehabt  
Beim start kommt. Was könnte das sein

 ![20241102_164558](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/1/d/1d9af294c4a732292009c11e5024afc94df374a2.jpeg)

---

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [November 2, 2024, 8:55pm UTC](https://forum.onefinitycnc.com/t/vector-resizing-recalculating-isnt-adjusting/29118/4 "2024-11-02T20:55:24Z")

</div>

Hey Zetteboy1234,

x-post: this is a duplicate of [#29179](https://forum.onefinitycnc.com/t/change-tool-and-attach/29179). Please don’t post the same issue in different posts.
