# Vevor Spindle / VFD

**URL:** <https://forum.onefinitycnc.com/t/vevor-spindle-vfd/14368>\
**Category:** Spindle/VFD (Aftermarket/Unsupported)\
**Created:** [July 29, 2022, 10:24am UTC](https://forum.onefinitycnc.com/t/vevor-spindle-vfd/14368 "2022-07-29T10:24:07Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tas](https://avatars.discourse-cdn.com/v4/letter/t/cc9497/32.png) [@Tas](https://forum.onefinitycnc.com/u/Tas)\
**Post date:** [July 29, 2022, 10:24am UTC](https://forum.onefinitycnc.com/t/vevor-spindle-vfd/14368/1 "2022-07-29T10:24:08Z")

</div>

Has anyone used the Vevor VFDs or Spindles? Does anyone know who actually makes them? The pricing on these (in Australia) seems too good to be true (not a good sign). It seems to be hard to find any good detailed information on them (which makes me more dubious). So unless others have had a positive experience with them, I think I will keep looking :-).

---

<div class="post-metadata">

**Author:** ![Alphonse](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/alphonse/32/3408_2.png) [@Alphonse](https://forum.onefinitycnc.com/u/Alphonse)\
**Post date:** [July 29, 2022, 5:02pm UTC](https://forum.onefinitycnc.com/t/vevor-spindle-vfd/14368/2 "2022-07-29T17:02:55Z")

</div>

I have called Vevor seeking information on a specific product and the operator told me that she’d get the supplier/manufacturer to call me. I never got the call.

I then did some research on Vevor in terms of who they are. My take is that they are a reseller of Chinese made goods. It appeared to me that they likely make very little if anything and simply buy from suppliers in China and put their name on it.

I gambled and bought a Vevor water cooler for my water cooled spindle. It works fine. I personally would be far more cautious on a spindle and VFD from them. If a Chinese made spindle and VFD are your target, I suggest that you stick with HY.

---

<div class="post-metadata">

**Author:** ![Tas](https://avatars.discourse-cdn.com/v4/letter/t/cc9497/32.png) [@Tas](https://forum.onefinitycnc.com/u/Tas)\
**Post date:** [July 29, 2022, 9:21pm UTC](https://forum.onefinitycnc.com/t/vevor-spindle-vfd/14368/3 "2022-07-29T21:21:35Z")

</div>

Thanks, aligns with what I have been able to find so far.

---

<div class="post-metadata">

**Author:** ![vlai28](https://avatars.discourse-cdn.com/v4/letter/v/a587f6/32.png) [@vlai28](https://forum.onefinitycnc.com/u/vlai28)\
**Post date:** [July 29, 2023, 10:21am UTC](https://forum.onefinitycnc.com/t/vevor-spindle-vfd/14368/4 "2023-07-29T10:21:07Z")

</div>

Hey Tas I noticed you were looking at the vevor spindle last year … did you ever make the purchase?  
I just set mine up and was wondering if you got one so I could ask you a few questions.
