# VFD for 80mm 2.2kw 110v **URL:** \ **Category:** Spindle/VFD (Aftermarket/Unsupported)\ **Created:** [April 29, 2024, 2:25pm UTC](https://forum.onefinitycnc.com/t/vfd-for-80mm-2-2kw-110v/26741 "2024-04-29T14:25:40Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![tfirst1999](https://avatars.discourse-cdn.com/v4/letter/t/4491bb/32.png) [@tfirst1999](https://forum.onefinitycnc.com/u/tfirst1999)\ **Post date:** [April 29, 2024, 2:25pm UTC](https://forum.onefinitycnc.com/t/vfd-for-80mm-2-2kw-110v/26741/1 "2024-04-29T14:25:40Z")
Newbie question I bought an onefinity cnc (woodworker). Then a Huanyang 100v 2.2kw 80mm spindle and now I find out I need VFD to match. I have no idea what I am looking for to match. The control cable has an (I am guessing a 4 pin connection that plugs into spindle and the other end is 4 seperate wires hanging loose. Help please and thanks ---
**Author:** ![tfirst1999](https://avatars.discourse-cdn.com/v4/letter/t/4491bb/32.png) [@tfirst1999](https://forum.onefinitycnc.com/u/tfirst1999)\ **Post date:** [April 29, 2024, 4:31pm UTC](https://forum.onefinitycnc.com/t/vfd-for-80mm-2-2kw-110v/26741/3 "2024-04-29T16:31:44Z")
Thanks so much I am sinking fast but great advise will do. The more I try and learn the more confused I am. ---
**Author:** ![DizzyG](https://avatars.discourse-cdn.com/v4/letter/d/a87d85/32.png) [@DizzyG](https://forum.onefinitycnc.com/u/DizzyG)\ **Post date:** [April 29, 2024, 8:08pm UTC](https://forum.onefinitycnc.com/t/vfd-for-80mm-2-2kw-110v/26741/4 "2024-04-29T20:08:10Z")
You’ll find that there are virtually NO 2.2kw, 110V, spindles available. This is due to the current that would be needed, well over the limits of 110V wiring. I run a 1.5kw, 110v and I can tell you there’s little overhead on the 20A circuit it’s on… 2.2kw, 220V spindles are everywhere and draw much less current. I’d have one if I had 220 available in my garage… Hope this helps, Eric ---
**Author:** ![tfirst1999](https://avatars.discourse-cdn.com/v4/letter/t/4491bb/32.png) [@tfirst1999](https://forum.onefinitycnc.com/u/tfirst1999)\ **Post date:** [April 29, 2024, 9:32pm UTC](https://forum.onefinitycnc.com/t/vfd-for-80mm-2-2kw-110v/26741/5 "2024-04-29T21:32:54Z")
Thank you for the information