# VFD settings for HY 110v spindle

**URL:** <https://forum.onefinitycnc.com/t/vfd-settings-for-hy-110v-spindle/3796>\
**Category:** Uncategorized\
**Created:** [February 25, 2021, 1:51am UTC](https://forum.onefinitycnc.com/t/vfd-settings-for-hy-110v-spindle/3796 "2021-02-25T01:51:16Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![kitkat](https://avatars.discourse-cdn.com/v4/letter/k/b487fb/32.png) [@kitkat](https://forum.onefinitycnc.com/u/kitkat)\
**Post date:** [February 25, 2021, 1:51am UTC](https://forum.onefinitycnc.com/t/vfd-settings-for-hy-110v-spindle/3796/1 "2021-02-25T01:51:16Z")

</div>

Looking for HY vfd settings to start my 110v HY spindle. I tried the book but must be missing something. Don’t have my machine yet but I want to test the spindle. Thx in advance for any info.

2

---

<div class="post-metadata">

**Author:** ![cyberreefguru](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/cyberreefguru/32/27385_2.png) [@cyberreefguru](https://forum.onefinitycnc.com/u/cyberreefguru)\
**Post date:** [February 27, 2021, 11:57pm UTC](https://forum.onefinitycnc.com/t/vfd-settings-for-hy-110v-spindle/3796/2 "2021-02-27T23:57:55Z")

</div>

HI Richard - search the forums. There are couple detailed threads about it. (I don’t have one, so I didn’t pay too much attention to them).

-Tom

---

<div class="post-metadata">

**Author:** ![blaghislain](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/blaghislain/32/33736_2.png) [@blaghislain](https://forum.onefinitycnc.com/u/blaghislain)\
**Post date:** [February 28, 2021, 12:09pm UTC](https://forum.onefinitycnc.com/t/vfd-settings-for-hy-110v-spindle/3796/3 "2021-02-28T12:09:05Z")

</div>

> [@Information to build you own Onefinity Companion Control Box](https://forum.onefinitycnc.com/t/information-to-build-you-own-onefinity-companion-control-box/2647/21):
>
> Recommended Huanyang Configuration Unlock VFD Config PD000 SET 0 SET – UNLOCK VFD CONFIG Initial Configuration provided HY for my 110V 2.2kw water spindle (Check your own manual) PD005 SET 400 SET – DEFINE MAX FREQUENCY SETTING TO: 400.00 Hz (default was 50.00) PD004 SET 400 SET – DEFINE BASE FREQUENCY SETTING TO: 400.00 Hz (default was 50.00) PD002 SET 1 SET – DEFINE SOURCE OF OPERATING FREQUENCY SETTING TO: SET BY EXTERNAL TERMINALS. (default was 0) PD070 SET 1 SET – DEFINE ANALOG INPUT …

---

<div class="post-metadata">

**Author:** ![kitkat](https://avatars.discourse-cdn.com/v4/letter/k/b487fb/32.png) [@kitkat](https://forum.onefinitycnc.com/u/kitkat)\
**Post date:** [February 28, 2021, 12:42pm UTC](https://forum.onefinitycnc.com/t/vfd-settings-for-hy-110v-spindle/3796/4 "2021-02-28T12:42:38Z")

</div>

Thanks. I did find some info from another site… Cnc zone  
Plus info on here. It worked.

---

<div class="post-metadata">

**Author:** ![kitkat](https://avatars.discourse-cdn.com/v4/letter/k/b487fb/32.png) [@kitkat](https://forum.onefinitycnc.com/u/kitkat)\
**Post date:** [February 28, 2021, 5:24pm UTC](https://forum.onefinitycnc.com/t/vfd-settings-for-hy-110v-spindle/3796/5 "2021-02-28T17:24:14Z")

</div>

Thanks really helped me out.