# Vfd will not run any faster than 7200rpm even when set to 18,000rpm

**URL:** <https://forum.onefinitycnc.com/t/vfd-will-not-run-any-faster-than-7200rpm-even-when-set-to-18-000rpm/29075>\
**Category:** Uncategorized\
**Created:** [October 25, 2024, 7:17pm UTC](https://forum.onefinitycnc.com/t/vfd-will-not-run-any-faster-than-7200rpm-even-when-set-to-18-000rpm/29075 "2024-10-25T19:17:53Z")\
**Posts on this page:** 1\
**Showing post:** 10

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [October 27, 2024, 5:01pm UTC](https://forum.onefinitycnc.com/t/vfd-will-not-run-any-faster-than-7200rpm-even-when-set-to-18-000rpm/29075/10 "2024-10-27T17:01:07Z")

</div>

Hey Keith,

- [Huanyang VFD wiring to Elite Masso G3 Touch](https://forum.onefinitycnc.com/t/huanyang-vfd-wiring-to-elite-masso-g3-touch/21870/5)

---

_[View the full topic](https://forum.onefinitycnc.com/t/vfd-will-not-run-any-faster-than-7200rpm-even-when-set-to-18-000rpm/29075)._