# Web Interface - Failure to Load

**URL:** <https://forum.onefinitycnc.com/t/web-interface-failure-to-load/24034>\
**Category:** Troubleshooting (X35/X50)\
**Created:** [December 16, 2023, 8:14pm UTC](https://forum.onefinitycnc.com/t/web-interface-failure-to-load/24034 "2023-12-16T20:14:16Z")\
**Posts on this page:** 1\
**Showing post:** 14

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [September 20, 2024, 3:48am UTC](https://forum.onefinitycnc.com/t/web-interface-failure-to-load/24034/14 "2024-09-20T03:48:33Z")

</div>

Hey RogueMachinist,

> [@RogueMachinist](#):
>
> Will the BB controller default to some ip if dhcp lease fails?

The [buildbotics](https://buildbotics.com)-derived Onefinity CNC controller’s system provides a [link-local address](https://en.wikipedia.org/wiki/Link-local_address) automatically ([zeroconf](https://en.wikipedia.org/wiki/Zero-configuration_networking) / [Avahi](https://en.wikipedia.org/wiki/Avahi_(software)) is installed). This way, the controller is accessible under [http://onefinity.local](http://onefinity.local). On older windows computers, you must first install [Apple Bonjour](https://en.wikipedia.org/wiki/Bonjour_(software)) (on your own computer, not on the controller) for automatic discovery. You can then log in via the ssh server that is installed on the controller:

```none
user@yourcomputer:~$ ssh bbmc@onefinity.local
bbmc@onefinity.local's password: onefinity
Linux onefinity 4.9.59-v7+ #1047 SMP Sun Oct 29 12:19:23 GMT 2017 
armv7l

The programs included with the Debian GNU/Linux system are 
free software; the exact distribution terms for each program are
described in the individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to
the extent permitted by applicable law.

Last login: Sat Jul 13 22:45:27 2024 from 192.168.250.42

SSH is enabled and the default password for the 'pi' user
has not been changed. This is a security risk - please login 
as the 'pi' user and type 'passwd' to set a new password.

bbmc@onefinity:~ $

```

---

_[View the full topic](https://forum.onefinitycnc.com/t/web-interface-failure-to-load/24034)._
