# Webcam for Onefinity

**URL:** <https://forum.onefinitycnc.com/t/webcam-for-onefinity/605>\
**Category:** Accessories\
**Created:** [August 21, 2020, 11:48pm UTC](https://forum.onefinitycnc.com/t/webcam-for-onefinity/605 "2020-08-21T23:48:58Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![muddyfeet](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/muddyfeet/32/131_2.png) [@muddyfeet](https://forum.onefinitycnc.com/u/muddyfeet)\
**Post date:** [August 21, 2020, 11:48pm UTC](https://forum.onefinitycnc.com/t/webcam-for-onefinity/605/1 "2020-08-21T23:48:59Z")

</div>

On the Buildbotics website, it says their controller is compatible with a USB webcam to view/monitor the machine through the HTML control page. They sell the Logitech C270 alongside their hardware. I would assume this works with the Onefinity branded controller as well. (does it?). It seems like nobody has mentioned this function yet. I picked one up on eBay for $40.

Here is a list of webcams known to be compatible with the Raspberry Pi hardware: [RPi USB Webcams - eLinux.org](https://elinux.org/RPi_USB_Webcams)

 ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/2/20b1d16d7e9a0eff948aa8709de25a3948c69d00.jpeg)

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [August 22, 2020, 1:14am UTC](https://forum.onefinitycnc.com/t/webcam-for-onefinity/605/2 "2020-08-22T01:14:13Z")

</div>

Yes! This one works.