# What controllers will the Full Eight support? **URL:** \ **Category:** The Full Eight (4x8)\ **Created:** [July 25, 2025, 9:50pm UTC](https://forum.onefinitycnc.com/t/what-controllers-will-the-full-eight-support/34672 "2025-07-25T21:50:48Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Dirkus](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/dirkus/32/9060_2.png) [@Dirkus](https://forum.onefinitycnc.com/u/Dirkus)\ **Post date:** [July 25, 2025, 9:50pm UTC](https://forum.onefinitycnc.com/t/what-controllers-will-the-full-eight-support/34672/1 "2025-07-25T21:50:48Z")
On the Full Eight, what controllers will support it? Dirkus ---
**Author:** ![TMToronto](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TMToronto](https://forum.onefinitycnc.com/u/TMToronto)\ **Post date:** [July 25, 2025, 10:57pm UTC](https://forum.onefinitycnc.com/t/what-controllers-will-the-full-eight-support/34672/2 "2025-07-25T22:57:46Z")
My thoughts are … 1. any controller that can control 5 axes - X Y1 Y2 Z A 2. the software - CAD/CAM/PP - will also be important to the functioning of the moving table ---
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [July 25, 2025, 11:16pm UTC](https://forum.onefinitycnc.com/t/what-controllers-will-the-full-eight-support/34672/3 "2025-07-25T23:16:38Z")
Masso and New Redline controller. Not buildbotics. ---
**Author:** ![MikeXYZ](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/mikexyz/32/32034_2.png) [@MikeXYZ](https://forum.onefinitycnc.com/u/MikeXYZ)\ **Post date:** [July 26, 2025, 1:28pm UTC](https://forum.onefinitycnc.com/t/what-controllers-will-the-full-eight-support/34672/4 "2025-07-26T13:28:00Z")
Is “Automatic tiling” done in the post processor? Does the controller take care of everything? Something else? Would love to know what the programming side looks like.