# What could be causing this

**URL:** <https://forum.onefinitycnc.com/t/what-could-be-causing-this/25798>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [March 8, 2024, 4:33pm UTC](https://forum.onefinitycnc.com/t/what-could-be-causing-this/25798 "2024-03-08T16:33:00Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![UltraPeepi](https://avatars.discourse-cdn.com/v4/letter/u/fbc32d/32.png) [@UltraPeepi](https://forum.onefinitycnc.com/u/UltraPeepi)\
**Post date:** [March 8, 2024, 10:44pm UTC](https://forum.onefinitycnc.com/t/what-could-be-causing-this/25798/7 "2024-03-08T22:44:06Z")

</div>

I doubt it’s the same, but I had an issue with circular pocket skipping steps. It ended up being a software setting. Just throwing it out there: [Help with gcode and skipped steps (solved, max deviation)](https://forum.onefinitycnc.com/t/help-with-gcode-and-skipped-steps-solved-max-deviation/20324)

---

_[View the full topic](https://forum.onefinitycnc.com/t/what-could-be-causing-this/25798)._
