# What does Onefinity recommend to purchase? (FAQ) **URL:** \ **Category:** Ordering / Purchasing Questions\ **Created:** [March 10, 2022, 3:14pm UTC](https://forum.onefinitycnc.com/t/what-does-onefinity-recommend-to-purchase-faq/11792 "2022-03-10T15:14:06Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [March 10, 2022, 3:14pm UTC](https://forum.onefinitycnc.com/t/what-does-onefinity-recommend-to-purchase-faq/11792/1 "2022-03-10T15:14:06Z")
We get many questions asking what we recommend in terms of machine, wasteboard, bits, router, software, monitor etc. We’ll try to answer that in this FAQ. There are more advanced answers (and workarounds) to some of these points, but this is the easiest, general, beginner friendly, answers we can give. # **Machine** (required) Let’s start with the machine. We’d always recommended getting the largest one you can fit. You can always cut smaller pieces on a larger machine, but (generally) you cannot cut larger on a smaller machine. Try to buy your second cnc first 😛 Our largest working area is the Elite Foreman. It has a 48"x48" cutting area. If you can fit it in your work space, this is the best ‘bang for your buck’! [https://www.onefinitycnc.com/cnc-machines](https://www.onefinitycnc.com/cnc-machines) There are two types of machines, Original Series or Pro Series powered by buildbotics) or Elite Series (powered by Masso). More details between these here: [What is the difference between the (X-35) Original Series, (X-50) Pro Series, and the ELITE GEN 1 Series Onefinity CNC Machines?](https://forum.onefinitycnc.com/t/what-is-the-difference-between-the-original-x-35-x-50-machines-and-the-elite-series-onefinity-cnc-machines/16747) # Router/Spindle: (required) **Makita router** for 65mm mounts (not sold by onefinity but technically supported: [Makita RT0701C 1-1/4 HP Compact Router - Power Laminate Trimmers - Amazon.com](https://amzn.to/413FRPW?tag=benmyers-20) Or **Onefinity Spindle Kit by Redline CNC:** [https://www.onefinitycnc.com/shop/category/spindles](https://www.onefinitycnc.com/shop/category/spindles) If you are an advanced user, we recommend the Spindle. Read about the differences between the Makita router and Onefinity Spindle kit here: > [@Makita Router vs a Spindle FAQ](https://forum.onefinitycnc.com/t/makita-router-vs-a-spindle-faq/10870): > > This FAQ is directed at new users to cnc routers. Often, we get asked, which should I get, the Makita router or a spindle? This faq is designed to help answer that question for you. Each individual can come to a different conclusion. There is no one right answer. Technical Support and Warranty One important point to consider is that Onefinity does not offer any technical support for any spindles other than the [Onefinity Spindle Kit by Redline CNC](https://www.onefinitycnc.com/post/introducing-the-redline-cnc-spindle-kit-for-onefinity-cnc) or Makita Trim Router. When using any other … # Stiffy (extra third rail) The stiffy is an extra 3rd rail for the X rail that spans across the two y rails. It adds extra rigidity. The machine is stout enough to handle the router and spindles, and works great for wood. If you are machining aircraft aluminum parts where every micron counts, you’ll want to get the stiffy to dial in tighter tolerances. If you are not measuring your parts with a caliper or just making wooden signs, you’d never notice the difference. Since the stiffy is a bolt on item, you can add this at any time in the future. Its great to see if the machine works to your needs first, then if you notice your carves would benifit from the stiffy, add this later. > **[CNC Support Rail | CNC Machine Stabilizer | Onefinity CNC | CNC Machine...](https://www.onefinitycnc.com/shop/category/stiffy-optional-add-on)** > > Enhance your CNC machine’s stability and performance with the Onefinity CNC Support Rails. This 3rd rail helps to improve precision and overall reliability. # **Bits** (required) The Onefinity comes with one 1/4 upcut bit by @BitsBitsCompany. Bit’s are what go into the router and cut the wood. Bits are required for use. We sell many here: [https://www.onefinitycnc.com/accessories](https://www.onefinitycnc.com/accessories) We feel a good selection is a 1/4 upcut/downcut endmill, 1/8 upcut/downcut endmill, one v bit, and a ball nose bit. There’s way to many variations to go into great detail here, but the internet has an overwhelming amount of information on bits. # **Screen (not applicable to elite series)** (required) We feel its best to get a screen with your Onefinity. We sell a 7", 8", and 10" (some may go in and out of stock as inventory permits). We recommend purchasing one of ours with the Onefinity. We’ve written a pretty extensive faq about screens. Check that out here. [What screens can I use with the Onefinity CNC (with a BB Buildbotics controller)](https://forum.onefinitycnc.com/t/what-screens-can-i-use-with-the-onefinity-cnc/9247) The Elite series controller is an all in one unit with the 15 inch screen as part of the housing. This is not optional, removable or upgradable. # **Software** (required) While you do not need a computer to run files on the Onefinity CNC, you will need design software to make those files. X-50 and Elite machines come with one year of Carveco for free. We have an extensive write up here: [What CAD/CAM software can be used to make gcode files for the Onefinity CNC](https://forum.onefinitycnc.com/t/what-cad-cam-software-can-be-used-to-make-gcode-files-for-the-onefinity-cnc/10253) # **Dust Boot / Vacuum** (optional, but foolish to use without 🙂 ) Since we’re born from the Suck IT Dust boot, we couldn’t give out recommendations without mentioning dust collection! While you can run your machine without it, we strongly feel the Suck It dust boot is an essential part of the Onefinity CNC. It’s safer for your health and better for your machine to always run with dust collection. You can get one here: [https://www.onefinitycnc.com/product-page/onefinity-suckit-dust-boot-basic](https://www.onefinitycnc.com/product-page/onefinity-suckit-dust-boot-basic) We prefer the FEIN dust collector paired with a dust seperator (not required, but useful). Fein Dust collector vacuum: [Amazon.com: Fein Turbo I Wet/Dry Dust Extractor, Ultra-Quiet Vacuum - 5.8-Gallon Capacity, 151 CFM Suction, Anti-Static System, 13 ft Hose, 19 ft Cord, Includes Hose and Filter - 92035236090 : Tools & Home Improvement](https://amzn.to/49b5Ghu?tag=benmyers-20) Dust separator/cyclone: [Amazon.com: Oneida Air Systems Dust Collector & Cyclone Separator Kit w/ Clear Bucket, DD Deluxe 5-Gal - Portable Cyclone Machine for Wet and Dry Shop Vacuums : Tools & Home Improvement](https://amzn.to/49dWauf?tag=benmyers-20) # **Frame/Wasteboard** (optional) Our machines do not come with a base. The Onefinity was designed to attach to any flat surface. For over a year, every machine was just bolted to a table. In our second year, we released the QCW (quick change wasteboard). This allows users the option to get a ‘all in one’ type of frame. It also has built in t-track slots for easy clamping of material. It makes aligning and setting up the machine a breeze as it’s has a notched mounting system allowing for simple alignment right out of the box. The QCW alone is designed to simply sit on a flat surface. We also have a rolling/folding leg kit that attaches to the QCW. (sold separately). These rolling/folding leg kit provides a very solid stand for your Onefinity. It takes place of the user needing to build or provide a table for the Onefinity machine. With the QCW and rolling/folding leg kit, you can be up and running in less than an hour! The kit is perfect for small shops where having a dedicated space for your CNC isn’t practical, as you can fold up the Onefinity and tuck it into a corner when not in use to gain back your valuable working space. We’d recommend purchasing the matching QCW and rolling folding leg kit for simplicity and ease of use. The QCW and Rolling folding leg kit is optional and not required for operation of the Onefinity. If you don’t want to go with t-track or the qcw, our friend [Myers Woodshop](https://www.myerswoodshop.com) has created an awesome system for threaded insert wasteboard. Check it out here: [https://creatoriq.cc/3SplFmX](https://creatoriq.cc/3SplFmX) # QCW: (get the matching size for your machine): (optional) > **[CNC Accessories | Spindle & Bit Sets | Onefinity CNC | Spindle & Bit...](https://www.onefinitycnc.com/shop/category/all-accessories)** > > Upgrade your setup with Onefinity’s CNC accessories. Providing you with spindles, bit sets, premium tools, and more for efficient and accurate machining. Secure from above vs below info: [Secure from above vs secure from below](https://forum.onefinitycnc.com/t/secure-from-above-vs-secure-from-below/6010) Rolling/Folding leg kit: [https://www.onefinitycnc.com/product-page/rolling-folding-stand-leg-kit](https://www.onefinitycnc.com/product-page/rolling-folding-stand-leg-kit) # **Cable Extensions** (optional) If you are planning to move the controller and depending on how your work area is setup, you may need longer cables to connect to the controller. These extensions do just that, extend the wires, they do not replace them. They go between the controller and current wires. You will need a set of cables for each rail. They are sold in packs of 2, so to do the whole machine (that has 4 wire) you will need two 2 packs. We do have 2’ and 4’ options available on our website [https://www.onefinitycnc.com/accessories](https://www.onefinitycnc.com/accessories) # **Touchprobe** (optional but so worth it) Just like a joypad, the touch probe is not essential. However, most users of the Onefinity CNC will recommend purchasing it. It makes zeroing your material much easier and more precisive. This is definitely a recommended purchase. You can get it here: [https://www.onefinitycnc.com/product-page/onefinity-3-axis-touch-probe](https://www.onefinitycnc.com/product-page/onefinity-3-axis-touch-probe) # **Tool setter Eazy-E** (Optional but also worth it) Unlike the touch probe, the tool setter only works one Elite machines that use the Masso controller. It does not zero x or y, and it is calculates the offset of Z when chaning tools, so makes tool changes easier. Read more about the differences here: [https://www.onefinitycnc.com/post/what-is-the-difference-between-a-touch-probe-and-a-tool-height-setter-on-a-cnc-machine](https://www.onefinitycnc.com/post/what-is-the-difference-between-a-touch-probe-and-a-tool-height-setter-on-a-cnc-machine) Purchase here:[https://www.onefinitycnc.com/product-page/onefinity-tool-setter](https://www.onefinitycnc.com/product-page/onefinity-tool-setter) # **Joypad (not applicable to elite series) (Optional but 99% of users buy one)** The joypad, while not essential, is recommended by most users of the Onefinity CNC. A joypad makes moving the machine much simpler and more elegant. We don’t run our machines in house without one 🙂 Joypad will only work with non-elite machines. You can get one here: [https://www.onefinitycnc.com/product-page/onefinity-joystick](https://www.onefinitycnc.com/product-page/onefinity-joystick) # **Laser** (optional) Onefinity is one of the few CNC machines to support a laser out of the box. This turns your CNC machine into a laser as well. We recommend a laser to add to your toolbox! You can get one here: [https://www.onefinitycnc.com/lasers](https://www.onefinitycnc.com/lasers) # Rotary 4th Axis (optional) Like to work on round stock? Chess pieces or Gun Stocks? The rotary expands the capabilities of your Onefinity CNC machine. > **[CNC Rotary Axis | CNC 4th axis rotary table​ | Onefinity CNC | CNC 4th axis...](https://www.onefinitycnc.com/shop/category/rotary)** > > Add advanced capabilities to your CNC with Onefinity’s 4th Axis Rotary. The perfect addition for creating intricate and detailed rotary machining projects. # While most of the items we’ve listed are not required to use the Onefinity CNC, they definitely make the experience either quicker, more convenient, or more user friendly. We hope this helps!