# What I Made in December

**URL:** <https://forum.onefinitycnc.com/t/what-i-made-in-december/37119>\
**Category:** Gallery\
**Created:** [January 8, 2026, 5:40am UTC](https://forum.onefinitycnc.com/t/what-i-made-in-december/37119 "2026-01-08T05:40:13Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![LostInTheGarage](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/lostinthegarage/32/9144_2.png) [@LostInTheGarage](https://forum.onefinitycnc.com/u/LostInTheGarage)\
**Post date:** [January 8, 2026, 5:40am UTC](https://forum.onefinitycnc.com/t/what-i-made-in-december/37119/1 "2026-01-08T05:40:13Z")

</div>

![IMG_2687](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/0/9/09d133a0fcea01295b2fd72e64f9ecaf52ecc174.jpeg)

 ![IMG_2957](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/9/a/9ae8cb8576607d855efbc647af7985d2a96d453e.jpeg)

 ![IMG_2909](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/8/1/818bb4ef15e6a26ef329e4be5de021e7d4b177c8.jpeg)

 ![IMG_2908](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/3/e/3e247ff90bdee1c32534312883b3ab83f87b987a.jpeg)

 ![IMG_2896](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/f/a/fafb16d392bd5fb4cc0f592b30e35c2e95539fff.jpeg)

Thought I’d just share some of the things I’ve made over the last month on the Onefinity.

---

<div class="post-metadata">

**Author:** ![L.M](https://avatars.discourse-cdn.com/v4/letter/l/a87d85/32.png) [@L.M](https://forum.onefinitycnc.com/u/L.M)\
**Post date:** [January 8, 2026, 4:58pm UTC](https://forum.onefinitycnc.com/t/what-i-made-in-december/37119/2 "2026-01-08T16:58:31Z")

</div>

Nice work.

How do you finish your cutting boards? I use 2 to 3 coats food safe mineral oil, since the boards have to be retreated regularly. Your finish has a much nicer luster than anything I’ve achieved.

I’ve never worried much about it since I’ve only made “working” boards so there’s no expectation of a great finish, but your presentation is much nicer.

Cheers.

---

<div class="post-metadata">

**Author:** ![LostInTheGarage](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/lostinthegarage/32/9144_2.png) [@LostInTheGarage](https://forum.onefinitycnc.com/u/LostInTheGarage)\
**Post date:** [January 9, 2026, 5:54am UTC](https://forum.onefinitycnc.com/t/what-i-made-in-december/37119/3 "2026-01-09T05:54:53Z")

</div>

I use mineral oil first, and then once I’ve let it sit and removed the excess I use board butter. Currently, I use board butter from 731 Woodworks because I got some from them at a meet and greet. Once I run out, I’ll probably try to make my own (mix of bees wax and mineral oil). I’ve used butcher block conditioner instead of board butter. It works fine, but I think I prefer board butter.

---

<div class="post-metadata">

**Author:** ![LostInTheGarage](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/lostinthegarage/32/9144_2.png) [@LostInTheGarage](https://forum.onefinitycnc.com/u/LostInTheGarage)\
**Post date:** [January 10, 2026, 4:06am UTC](https://forum.onefinitycnc.com/t/what-i-made-in-december/37119/4 "2026-01-10T04:06:59Z")

</div>

Pardon my poor manners. Thank you for the compliments!