# What is recommended for Air Assist for the 7 watt j tech laser

**URL:** <https://forum.onefinitycnc.com/t/what-is-recommended-for-air-assist-for-the-7-watt-j-tech-laser/4553>\
**Category:** Uncategorized\
**Created:** [March 24, 2021, 1:39am UTC](https://forum.onefinitycnc.com/t/what-is-recommended-for-air-assist-for-the-7-watt-j-tech-laser/4553 "2021-03-24T01:39:56Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Eddie](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/eddie/32/964_2.png) [@Eddie](https://forum.onefinitycnc.com/u/Eddie)\
**Post date:** [March 24, 2021, 1:39am UTC](https://forum.onefinitycnc.com/t/what-is-recommended-for-air-assist-for-the-7-watt-j-tech-laser/4553/1 "2021-03-24T01:39:56Z")

</div>

Can any one recommend an air assist compleate kit with air compressor and where to purchase it for the 7 watt j tech laser?

---

<div class="post-metadata">

**Author:** ![Kat](https://avatars.discourse-cdn.com/v4/letter/k/b19c9b/32.png) [@Kat](https://forum.onefinitycnc.com/u/Kat)\
**Post date:** [March 25, 2021, 1:01am UTC](https://forum.onefinitycnc.com/t/what-is-recommended-for-air-assist-for-the-7-watt-j-tech-laser/4553/2 "2021-03-25T01:01:25Z")

</div>

Probably not what your looking for, but I set a box fan in front of the machine when I use the laser. Not the best way of doing it, but it works in a pinch.

---

<div class="post-metadata">

**Author:** ![Eddie](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/eddie/32/964_2.png) [@Eddie](https://forum.onefinitycnc.com/u/Eddie)\
**Post date:** [March 25, 2021, 2:45am UTC](https://forum.onefinitycnc.com/t/what-is-recommended-for-air-assist-for-the-7-watt-j-tech-laser/4553/3 "2021-03-25T02:45:18Z")

</div>

I have a ventilation system for the laser . I thought the air assist would help with cut outs ( make the laser a little more efficient in cutting stuff out) ??